Expanding Plug Valve

Our expanding plug valve is designed for applications where positive shut-off, verifiable zero-leakage and double block and bleed (DBB) capabilities are required. The design has a robust clear acrylic indicator flag protector. This keeps moisture and debris from infiltrating the operator housing. The top of the indicator cap is vented to ensure that air flow will quickly evaporate any condensation that appears inside the clear housing. Features • Manufactured and tested to API 6D and ANSI B16.34 specifications • Cast body design • Double block and bleed/double isolation and bleed • Repeated positive...

Size (inches) * Electroless Nickel Plated - Entire internal surface ** Electroless Nickel Plated - Entire component *** All Omniseal® valves in class 300 and 600 are supplied with soluble reinforced Viton seals Optional Materials of Construction and Other Customized Features Our expanding plug valves are also available in a variety of alternate configurations or materials of construction depending on customer preferences, specifications, severe temp ranges and/or service conditions. Some common options include valves as follows: • Constructed to meet requirements of NACE MR0175/ISO 15156 • With...

Minimum clearance required to replace slips. (Number) and size Tapped Holes CV Class Size Oper. A B C D F G H Weight Each Flange (GPM) Production Solutions

Minimum clearance required to replace slips. (Number) and size Tapped Holes CV G H I Weight Each Flange (GPM) Class Size Oper. A B C D E F V Designates a valve with a reduced face-to-face dimension versus the Omni standard pattern, except for the 16V

Minimum clearance required to replace slips. (Number) and size Tapped Holes CV Class Size Oper. A BCDEFGHI Weight Each Flange (GPM) Production Solutions

Minimum clearance required to replace slips. (Number) and size Tapped Holes CV Class Size Oper. A BCDEFGHI Weight Each Flange (GPM)

National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Corporate Headquarters 7909 Parkwood Circle Drive Houston, Texas 77036 Process and Flow Technologies 4310 North Sam Houston Parkway E. Houston, Texas 77032 Varco in no way assumes responsibility for liability for any USA loss, damage or injury resulting from the use of information and data herein. All applications for the material described are at the user’s risk...