Force Chain Hoist Testing Kit CHTK Friction Clutch Testing on Chain Hoists To perform the test, the force transducer is inserted into the chain, travels upwards with it against the base of the chain hoist and thereby blocks the chain. The display unit allows you to read off the magnitude of the force at which the friction clutch operates. The CHTK consists of a force transducer with integrated handle and a display unit. Included in the delivery are also two chain adapters and three centering sleeves to ensure the CHTK can be used for any type of chain hoist in the specifi ed load range. The battery-driven indicating device evaluates the signals returned by the force transducer via a cable. The large illuminated graphical display makes it very easy for the user to read off the measured values. Optionally 99 different data sets can be stored and transferred via an infrared interface to the PC. One special feature is the single sensor concept for the entire load range. Specifications Load Range Hand-Held Indicator LCD, 5 digits, illuminated, optional infared interface for data evaluation via PC Storage Function (Optional) 99 data sets (serial number with 12 digits (Additional measuring ranges available) Additional Display MIN, MAX, HOLD, AVG, TARA, LGT Function Battery Life 8 hours (per rechargeable battery) Chain Adapter 2 Pieces, for chain size from 3 x 9 mm up to 11 x 31 mm (EN818-2) Chain Center Sleeve Temperature Application Area Environmental Protection Force Transducer IP67 Hand-Held Indicator IP40 With the new CHTK tester for overload cutoff, NOSHOK and tecsis offer a precise, robust and dependable tester for slip couplings on chain hoists. The CHTK has a large range of measurement, with high accuracy, low weight and ease of use. CORPORATE HEADQUARTERS 1010 West Bagley Road • Berea, Ohio 44017 440-243-0888 • FAX 440-243-3472 E-MAIL: [email protected] WEB: www.noshok.com