Hazardous Location Pressure Transmitters Intrinsically Safe 625/626 • Low pressure ranges for vapor recovery applications, vacuum and compound ranges through 0 psig to 15,000 psig; absolute ranges from 0 psia to 15 psia through 0 psia to 300 psia • Current output • 316 and 14-4PH stainless steel wetted parts • Factory Mutual and Canadian Standards Association approved • • SPECIFICATIONS Output signal Pressure ranges Accuracy APPLICATIONS Chemical processing Gas pressure measurement Oil field & offshore Mining Vapory recovery systems Well head measurement Stability Adjustment Response time Pressure cycle limit Durability Temperature ranges Power requirement* Load limitations Proof pressure Burst pressure Measuring element NOSHOK 625 and 626 Series transmitters are Factory Mutual and Canadian Standards Association approved for use in hazardous location applications as follows: effects of non-linearity, hysteresis, non-repeatability, zero point and full scale errors) ± 10% full scale for zero and span 150 Hz > 100,000,000 full scale cycles Compensated 32 °F to 176 °F (0 °C to 80 °C) Zero effect is ±0.011% full scale/ °F Span effect is ±0.011% full scale/ °F Media -4 °F to 185 °F (-20 °C to 85 °C) Ambient -4 °F to 176 °F (-20 °C to 80 °C) Storage -22 °F to 221 °F (-30 °C to 105 °C) 10 Vdc to 30 Vdc (4 mA to 20 mA, 2-wire) 3.5 times full scale for ranges 0 psi to 5 psi through 0 psi to 200 psi 2 times full scale for ranges 0 psi to 300 psi through 0 psi to 10,000 psi 1.5 times full scale for 0 psi to 15,000 psi 4 times full scale for ranges 0 psi to 5 psi through 0 psi to 200 psi 4 times full scale for ranges 0 psi to 300 psi through 0 psi to 10,000 psi 3 times full scale for 0 psi to 15,000 psi 625 Series is 316 stainless steel for ranges up through 0 psi to 300 psi, 316 stainless steel with 17-4PH stainless steel for 300 psi; 626 Series is 316 stainless steel with NBR o-ring 316 stainless steel 316 stainless steel Connection Housing material Environmental rating Electromagnetic rating CE compliant to EMC norm EN 61326:1997/A1:1998 Electrical protection Shock Vibration Weight 4 mA to 20 mA, 2-wire Vacuum through 0 psig to 15,000 psig Absolute from 0 psia to 15 psia through 0 psia to 300 psia Reverse polarity, over-voltage and short circuit

ORDERING INFORMATION DIMENSIONS ORDERING INFORMATION SERIES PRESSURE RANGES 316 Stainless steel flush diaphragm 0 psig to 150 psig 5000 0 psig to 5,000 psig 0 psig to 200 psig 6000 0 psig to 6,000 psig 0 psig to 300 psig 7500 0 psig to 7,500 psig 0 psig to 500 psig 8000 0 psig to 8,000 psig 0 psig to 750 psig 10000 0 psig to 10,000 psig 0 psig to 1,000 psig 15000 0 psig to 15,000 psig 0 psig to 1,500 psig 15A 0 psia to 15 psia 0 psig to 2,000 psig 30A 0 psia to 30 psia 0 psig to 3,000 psig 60A 0 psia to 60 psia 0 psia to 100 psia 0 psia to 150 psia 0 psia to 200 psia 0 psia to 300 psia Note:...