Abrasion-proof suction and blast hose; Super-light, highly flexible + Applications: Abrasion-proof suction and blast hose, especially suitable: • for abrasive solids such as dust, powder, fibres • for gaseous media such as oil vapors and weld- • for de-dusting and suction plants • excellent value for money (patented process, always shipped compressed, low transport costs and risk, occupies minimal space in warehouse) • super-light model • highly flexible + compressible 3:1 • abrasion-proof (abrasion resistance about 2.5 to 5 times better than most rubber materials and about 3 to 4 times better than most soft PVC's) • high tensile strength and tear resistant • good resistance to mineral oils and gasoline • good resistance to chemicals • good resistance to UV and ozone • small bending radius • free of softener and halogen • conform to RoHS guideline • according to German TRBS 2153 (formerly BGR 132): capable of electro-static discharge by grounding the spiral (0 to 149mm), recommen- ded for many applications with the exception of nflammable bulk materials Temperature Range • short time to +125 °C approx. Stock Lengths Design, material PROTAPE® tape hose 1. spring steel wire integrated in wall wall: special premium ester-polyurethane (Pre- 3. wall thickness 0.4 mm approx. Delivery variants •transparent (standard) •special colours: partially coloured, completely •customer-specific product marking •wall: microbe and hydrolysis resistant premium ether-polyurethane (Pre-PUR®) •wall: „bioplastic" derived from renewable raw Further Production Lengths

Stock Lengths Further Production Lengths Other diameters and lengths available on request. All values indicated here are approximate figures based on a temperature of 20 °C. Data subject to change without notice. Please also refer to our Technical Appendix on www.norres.com