B0009
B0009
Punch guide bushes conforming to DIN 9845 Form C are made from steel, hardened to 740 ±40 HV 10, and precision ground. The bore is rounded at one end, and both the outer diameter (OD) and inner diameter (ID) are clean and precision ground.
The document provides a detailed list of punch guide bushes with varying dimensions. Each item is identified by an order number and specified by dimensions D1 (inner diameter), D2 (outer diameter), L1 (length), R (radius), and T (tolerance). The dimensions range from D1 = 2 mm to D1 = 18 mm, with corresponding adjustments in D2, L1, R, and T.
- Material: Steel
- Hardness: 740 ±40 HV 10
- Precision ground OD and ID
- Rounded bore at one end
These punch guide bushes are typically used in manufacturing processes where precise alignment and guidance of punches are required.
Catalog excerpts
B0009Punch guide bushes DIN 9845 Form C Item description/product images Description Material: Steel. Version: Hardened to 740 ±40 HV 10 and ground. Note: Bore rounded one end. OD and ID clean and precision ground. Drawing reference: 1) Chamfer or centring collar
Open the catalog to page 1
Punch guide bushes DIN 9845 Form CDrawings Overview of items Order No. D1 D2 L1 R T
Open the catalog to page 2
Punch guide bushes DIN 9845 Form COverview of items Order No. D1 D2 L1 R T
Open the catalog to page 3
Punch guide bushes DIN 9845 Form COverview of items Order No. D1 D2 L1 R T
Open the catalog to page 4
B0009 Punch guide bushes DIN 9845 Form C Overview of items
Open the catalog to page 5All NORMTEILWERK ROBERT BLOHM GmbH catalogs and technical brochures
B00202 Pages
B00192 Pages
B00182 Pages
B00172 Pages
B00162 Pages
B00152 Pages
B00142 Pages
B00132 Pages
B00122 Pages
B00111 Page
B00072 Pages
B00062 Pages
B00052 Pages
B00042 Pages
B0003.L series8 Pages
B0003.K series8 Pages
B0002.B series11 Pages
B0002.A series11 Pages
B0001_B10 Pages
DRILL BUSHES6 Pages
B02185 Pages
B01463 Pages
B01323 Pages
B00101 Page
B0001_A11 Pages