1. Catalogs
  2. Normet
  3. utimec-mf-660-
video corpo

utimec-mf-660-
1 /13Pages

utimec-mf-660-

utimec-mf-660-
1 /13Pages

Catalog excerpts

utimec-mf-660--1

Technical Data Sheet 100168541 23.01.2019 100xxxxxx | 13.09.2021 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 1
utimec-mf-660--2

Introduction MF 660 Fire is fully equipped fire-fighting vehicle for underground environment. MF 660 have 6600 l water tank capacity with high capacity water pump and water cannon. Vehicle is possible to equip with foam tank and foam mixing system. MF 660 can be used also for tunnel wall/roof washing purposes. Power train M-series units have powerful 4-cylinder liquid cooled turbocharged engines, which power range is between 110–121 kW, depending of the selected engine model. Available emission standards are Tier 3 / Stage IIIA and Stage V that provide clean and efficient operation. Machine is...

 Open the catalog to page 2
utimec-mf-660--3

Technical specification WATER MODULE Water spraying cannon Water tank Pumping capacity 0.4 m3/min hydraulic driven compressor Tramming speed (horizontal): Deutz Mercedes-Benz Cummins Lateral gradient for tramming Longitudinal gradient for tramming Fire fighting equipment: Depending of machine configuration, lateral and longitudinal tramming gradient can temporarily be higher. Hand held water nozzles (2 pcs) ● Deutz TCD 2013 L4, 120 kW/2300 rpm, TIER 3 / STAGE IIIA approved Dana 123 series fixed Engine end axle: Exhaust system for Deutz engine: ● Catalytic exhaust gas purifier and muffler ○ Diesel...

 Open the catalog to page 3
utimec-mf-660--4

Technical specification 24 VDC ELECTRICAL SYSTEM TECHNICAL DOCUMENTATION Main switch: ● Mechanical switch in battery box ○ Electric switch with control in cabin and service switch in battery box ○ Electric switch with control in cabin, start isolator and service switch in battery box Standard documents: Instruction manuals, hard copy 2 pcs: ● English ○ Russian ○ One of destination EU languages Spare parts manuals, hard copy 2 pcs: ● English ○ Russian LED driving and indicator lights LED work lights LED side lights (left/right): ● White / White ○ Green / Red ○ Red / Green PDF manuals on USB-stick...

 Open the catalog to page 4
utimec-mf-660--5

PROCESS PRODUCTIVITY ○ Foam system with 500 l tank (reduces water capacity accordingly) ○ Pressure washer with 230 l tank ○ Road watering system ○ Hydraulic front support legs ○ Cabin door safety interlock switches: ○ Safety brake application ○ Puddle lights ○ Extra warning LED light (From the options below it is possible to choose 1-2 combinations) Color ● Amber ○ Blue ○ Red ○ Green (n/a with rotating light pattern) ○ White (n/a with rotating light pattern) CARRIER PRODUCTIVITY ○ Accessories for open cabin: ● Protective grids ○ Windshield with wipers ○ Accessories for enclosed cabin: ○ Audio...

 Open the catalog to page 5
utimec-mf-660--6

Services NORMET SERVICES Our Upgrades and Modifications services are designed to ensure the economical, efficient and purposeful performance of your equipment over its entire life cycle. A service provided by a reliable OEM like Normet ensures the safety and performance of your equipment. Normet Upgrades and Modifications save you both time and money, while delivering the high quality you expect from us. Our services cover the whole life cycle of your equipment. They include start-up and commissioning, genuine spare parts, upgrades & modifications, and remanufacturing, as well as rental and leasing...

 Open the catalog to page 6
utimec-mf-660--7

Start-up training General introduction and operation of machine Pre-operation checks Preparing the machine for specific operation conditions Safety instructions Technical introduction of equipment Hands-on service and pre-operation checks Controls and driving Basic (starting, driving, stopping, parking) 1.2 Practical training Driving, starting, stopping, parking 2. MAINTENANCE AND REPAIR TRAINING General operation of machines Symbols of drawings and codes Basic Basic Control systems Understanding hydraulic and electric schematics Function of main components (depending on equipment) Introduction...

 Open the catalog to page 7
utimec-mf-660--8

Dimensions DIMENSIONS Length Width Height Height of cabin Wheel base Track Ground clearance as shown TURNING RADIUS Outer Inner SIDE VIEW – BASIC MACHINE SIDE VIEW - MACHINE WITH OPTIONS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 8
utimec-mf-660--9

TURNING RADIUS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 9
utimec-mf-660--10

Dimensions FRONT AND BACK VIEWS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 10
utimec-mf-660--11

Tractive efforts OPERATING WEIGHT Empty Fully loaded DEUTZ TCD 2013 L4, 120 KW Performance curve DOC060005 MERCEDES-BENZ OM 904 LA 110 KW Performance curve with lock-up D100006272 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 11
utimec-mf-660--12

Tractive efforts CUMMINS B 4.5 121 KW Performance curve with lock-up DOC028557 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 12
utimec-mf-660--13

Technical Data Sheet 100168541 23.01.2019 100xxxxxx | 13.09.2021 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 13

All Normet catalogs and technical brochures

  1. MF 100

    12  Pages

  2. TamAcryl 2000

    2  Pages

  3. Alpha 30

    10  Pages

  4. Himec 9915 B

    6  Pages

  5. Minimec

    4  Pages

  6. BS 7622

    3  Pages

  7. Tornado

    5  Pages

  8. Alpha 15 TDH

    5  Pages

  9. Alpha 20

    6  Pages

  10. Scamec 2000 S

    5  Pages

  11. Utimec 1090 D

    3  Pages

  12. Multimec 6600

    3  Pages

  13. Multimec 1000

    3  Pages

  14. Himec 9915 BA

    4  Pages

  15. Himec 1905 B

    3  Pages

  16. Himec 1125 B

    3  Pages

  17. Himec 9905 BT

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.