Catalogs >
Normet >
utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021
12Pages

Catalog excerpts

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 1

Technical Data Sheet 100155330 23.01.2019 100xxxxxx | 10.05.2021 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 1

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 2

Introduction MF 500 Transmixer with practical concrete transport capacity 3 of 4.4 m is designed for concrete transportation in underground mines and tunnels where the tramming height is 2.4 m or more. Concrete drum rotation speed can be adjusted between 0-13 rpm. Power train M-series units have powerful 4-cylinder liquid cooled turbocharged engines, which power range is between 110–121 kW, depending of the selected engine model. Available emission standards are Tier 3 / Stage IIIA and Stage V that provide clean and efficient operation. Machine is equipped with Dana hydrodynamic...

Open the catalog to page 2

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 3

Technical specification CONCRETE DRUM ○ Cummins B4.5, 121 kW/2500 rpm with exhaust brake, STAGE V approved Drum volume (100% fill) Carrying capacity Requires diesel exhaust fluid (DEF) and ultra-low sulphur diesel (ULSD) Side hatches for drum filling ● 2 round hatches ○ 1 oval hatch Diesel particulate filter (DPF) DEF tank capacity Fuel tank capacity Adjustable drum discharge height Gear selector: ● Manual ○ Automatic Tramming speed (horizontal): Deutz Mercedes-Benz Cummins ● Deutz TCD 2013 L4, 120 kW/2300 rpm, TIER 3 / STAGE IIIA approved Exhaust system for Deutz engine: ● Catalytic...

Open the catalog to page 3

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 4

Technical specification HYDRAULIC SYSTEM Throttle and brake pedal layout: ● Front and side facing pedals with seat swivel ○ Front facing pedals Variable displacement pump system: 190 bar, 135 l/min at 2200 rpm Hydraulic oil tank capacity Gear lever side: ● On right side of the steering wheel ○ On left side of the steering wheel TECHNICAL DOCUMENTATION Main switch: ● Mechanical switch in battery box ○ Electric switch with control in cabin and service switch in battery box ○ Electric switch with control in cabin, start isolator and service switch in battery box Standard documents: Instruction...

Open the catalog to page 4

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 5

PROCESS PRODUCTIVITY ○ Additional oil cooler for drum rotation ○ Accelerator system with 250 l tank and hydraulic driven pump ○ Form oil system with 30 l tank ○ Hydraulic concrete drum brake ○ Emergency drum emptying (requires electric brake release pump) ○ Lock for drum lifting ○ Retarder ○ Front support legs ○ Pressure washer with 230 l tank ○ Cabin door safety interlock switches: ○ Safety brake application ○ Puddle lights ○ Extra warning LED light (From the options below it is possible to choose 1-2 combinations) Color ● Amber ○ Blue ○ Red ○ Green (n/a with rotating light pattern) ○...

Open the catalog to page 5

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 6

Service NORMET SERVICES Our Upgrades and Modifications services are designed to ensure the economical, efficient and purposeful performance of your equipment over its entire life cycle. A service provided by a reliable OEM like Normet ensures the safety and performance of your equipment. Normet Upgrades and Modifications save you both time and money, while delivering the high quality you expect from us. Our services cover the whole life cycle of your equipment. They include start-up and commissioning, genuine spare parts, upgrades & modifications, and remanufacturing, as well as rental and...

Open the catalog to page 6

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 7

Equipment Start-up and commissioning Start-up training General introduction and operation of machine Safety instructions Basic Use of manuals Basic training included in Technical introduction of equipment Hands-on service and pre-operation checks Controls and driving Basic (starting, driving, stopping, parking) Pre-operation checks Basic Introduction Driving, starting, stopping, parking Basic Introduction Preparing the machine for specific operation conditions Operation Basic Introduction Washing the machine Basic Introduction Troubleshooting Basic Basic 2. MAINTENANCE AND REPAIR TRAINING...

Open the catalog to page 7

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 8

Dimensions DIMENSIONS Length Width Height Height of cabin Wheel base Track Ground clearance as shown TURNING RADIUS Outer Inner SIDE VIEW – BASIC MACHINE SIDE VIEW – MACHINE WITH OPTIONS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 8

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 9

Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 9

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 10

Tractive efforts DEUTZ TCD 2013 L4, 120 KW Performance curve DOC023405 MERCEDES-BENZ OM 904 LA 110 KW Performance curve with lock-up 100006272 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 10

utimec-mf-500-transmixer-stage-iiia-and-v-tds-2021 - 11

100155330 10.05.2021 CUMMINS B 4.5 121 KW Performance curve with lock-up DOC028557 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 11