Catalogs >
Normet >
utimec-mf-400-lube

utimec-mf-400-lube
12Pages

Catalog excerpts

Technical Data Sheet 100150853 23.01.2019 100xxxxxx | 10.05.2021 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 1

Introduction MF Lubrication vehicles are designed for fuel and lubrication oil transportation in underground mines and tunnels. Utimec Lube has modular tank layout total volume of 4000 liters and volume can be shared from 250 l to 2500 l sections. Every section have individual pump, flow meter, hose reel and filling gun, maximum amount of sections is 5. Power train M-series units have powerful 4-cylinder liquid cooled turbocharged engines, which power range is between 110–120 kW, depending of the selected engine model. Available emission standards are Tier 3 / Stage IIIA and Stage V that...

Open the catalog to page 2

Technical specification LUBE MODULE ○ Cummins B4.5, 121 kW/2500 rpm with exhaust brake, STAGE V approved Primary capasity: ● 1 x 2000 l & 1 x 1000 l separately ○ 1 x 2500 l & 1 x 500 l separately ○ 1 x 3000 l (combined 2000 + 1000) ○ 1 x 2000 l tank with waste oil system + 1x 1000 l separately Requires diesel exhaust fluid (DEF) and ultra-low sulphur diesel (ULSD) Diesel particulate filter (DPF) DEF tank capacity Fuel tank capacity Additional tanks (pick one): ● 1 x 500 l ○ 2 x 250 l ○ 2 x 500 l ○ 4 x 250 l ○ 1 x 500 l + 2 x 250 l Gear selector: ● Manual ○ Automatic Tramming speed...

Open the catalog to page 3

Technical specification HYDRAULIC SYSTEM Throttle and brake pedal layout: ● Front and side facing pedals with seat swivel ○ Front facing pedals Variable displacement pump system: Gear lever side: ● On right side of the steering wheel ○ On left side of the steering wheel 190 bar, 135 l/min at 2200 rpm Hydraulic oil tank capacity TECHNICAL DOCUMENTATION Main switch ● Mechanical switch in battery box ○ Electric switch with control in cabin and service switch in battery box ○ Electric switch with control in cabin, start isolator and service switch in battery box Standard documents: Instruction...

Open the catalog to page 4

PROCESS PRODUCTIVITY ○ 0,4 m3/min compressor with hose reel, air tank and tyre filling pistol (mandatory with pneumatic pumps) ○ Protection around tank system made from profile steel ○ Pressure washer with 230 l tank on cabin roof (increases cabin height by 250 mm) ○ Hydraulic front support legs ○ Cabin door safety interlock switches: ○ Safety brake application ○ Puddle lights ○ Extra warning LED light (From the options below it is possible to choose 1-2 combinations) Color ● Amber ○ Blue ○ Red ○ Green (n/a with rotating light pattern) ○ White (n/a with rotating light pattern) Light pattern...

Open the catalog to page 5

Service NORMET SERVICE Our Upgrades and Modifications services are designed to ensure the economical, efficient and purposeful performance of your equipment over its entire life cycle. A service provided by a reliable OEM like Normet ensures the safety and performance of your equipment. Normet Upgrades and Modifications save you both time and money, while delivering the high quality you expect from us. Our services cover the whole life cycle of your equipment. They include start-up and commissioning, genuine spare parts, upgrades & modifications, and remanufacturing, as well as rental and...

Open the catalog to page 6

Equipment Start-up and commissioning Start-up training General introduction and operation of machine Safety instructions Basic Use of manuals Basic training included in Technical introduction of equipment Hands-on service and pre-operation checks Controls and driving Basic (starting, driving, stopping, parking) Pre-operation checks Basic Introduction Driving, starting, stopping, parking Preparing the machine for specific operation conditions Operation Basic Introduction Washing the machine Basic Basic Troubleshooting Basic Basic 2. MAINTENANCE AND REPAIR TRAINING General operation of...

Open the catalog to page 7

Dimensions DIMENSIONS Length Width Height Height of cabin Wheel base Track Ground clearance as shown TURNING RADIUS Outer Inner SIDE VIEW – BASIC MACHINE STAGE V DIMENSIONS IN BRACKETS [] Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 8

SIDE VIEW – MACHINE WITH OPTIONS TURNING RADIUS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 9

Tractive efforts OPERATING WEIGHT Empty Fully loaded DEUTZ TCD 2013 L4, 120 KW Performance curve DOC060005 MERCEDES-BENZ OM 904 LA 110 KW Performance curve with lock-up D100006272 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 10

Tractive efforts CUMMINS B 4.5 121 KW Performance curve with lock-up DOC028557 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 11

Open the catalog to page 12

utimec-mf-400-lube 12Pages

Catalog excerpts

All Normet catalogs and technical brochures

utimec-mf-400-lube
12Pages