1. Catalogs
  2. Normet
  3. utimec-mf-400-lube
video corpo

utimec-mf-400-lube
1 /9Pages

utimec-mf-400-lube

utimec-mf-400-lube
1 /9Pages

Catalog excerpts

utimec-mf-400-lube-1

Normet reserves the right to change this specification without further notice Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 1
utimec-mf-400-lube-2

INTRODUCTION MF Lubrication vehicles are designed for fuel and lubrication oil transportation in underground mines and tunnels. Utimec Lube has modular tank layout total volume of 4000 liters and volume can be shared from 250 l to 2500 l sections. Every section have individual pump, flow meter, hose reel and filling gun, maximum amount of sections is 5. POWER TRAIN M-series units have powerful 4-cylinder liquid cooled turbocharged engines, which power range is 120 kW. Available emission standards are Tier 3 / Stage IIIA and Stage V that provides clean and efficient operation. Machine is equipped...

 Open the catalog to page 2
utimec-mf-400-lube-3

TECHNICAL SPECIFICATION LUBE MODULE DOC059794.4 - 07.10.2024PERFORMANCE Maximum amount of separate sections four Primary capacity: Additional tanks (pick one): Pump type: Greasing system: • Deutz TCD 2013 L4, 120 kW/2300 rpm, Tier 3 / Stage IIIA approved Exhaust system for Deutz engine: • Catalytic exhaust gas purifier and muffler ° Diesel particulate filter (DPF) Fuel tank capacity 110 l Dana 24000 series powershift transmission 3 speeds forward and reverse 4-wheel drive Manual gear selector ° Cummins B4.5, 120 kW/2500 rpm with exhaust brake, Stage V approved Requires diesel exhaust fluid (DEF)...

 Open the catalog to page 3
utimec-mf-400-lube-4

Main switch: • Mechanical switch in battery box ° Electric switch with control in cabin and service switch in battery box ° Electric switch with control in cabin, start isolator and service switch in battery box LED driving and indicator lights LED side lights (left/right): • White / White ° Green / Red ° Red / Green ° Green (n/a with rotating light pattern) ° White (n/a with rotating light pattern) Light pattern Machine connectivity hardware (WLAN/3G/4G/LTE) Connectivity services: ° Analytics license for three years (includes access to analytics portal) ° Remote monitoring for one year Standard...

 Open the catalog to page 4
utimec-mf-400-lube-5

PROCESS PRODUCTIVITY ° 0.4m3/min compressor with hose reel, air tank and tyre filling pistol (mandatory with pneumatic pumps) ° AdBlue filling system with pneumatic pump and 500 l tank (replaces one lube pump) ° Waste oil system with pneumatic pump and 500 l tank ° Protection around tank system made from profile steel ° Front support legs ° Pressure washer with 230 l tank on cabin roof (increases cabin height by 250 mm) ° Accessories for open cabin: • Protective grids ° Windshield with wipers ° Accessories for enclosed cabin: ° Audio system ° Air conditioning with heating ° Heated mirrors ° 12...

 Open the catalog to page 5
utimec-mf-400-lube-6

SERVICES NORMET SERVICES Normet is committed to servicing its customers all over the world. We provide service from a single machine to an entire fleet. The Normet service offering consists of many different products from delivery of parts and training to fleet performance agreements. More information check normet.com: Training services can be tailored to your individual needs and range from equipment service training to process application training. We offer a sustainable training path from the beginning of your operation to the execution stage of your project. More information check normet.com....

 Open the catalog to page 6
utimec-mf-400-lube-7

DIMENSIONS Length Ground clearance as shown Turning radius outer Turning radius inner Wheel base SIDE VIEW – BASIC MACHINE Dimensions in () apply when the cabin is installed in the upper or lower position. SIDE VIEW – MACHINE WITH OPTIONS Dimensions in () apply when the cabin is installed in the upper or lower position. Normet reserves the right to change this specification without further notice Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

 Open the catalog to page 7
utimec-mf-400-lube-8

TOP VIEW Normet reserves the right to change this specification without further notice Pictures may include options and additional equipment.

 Open the catalog to page 8
utimec-mf-400-lube-9

TRACTIVE EFFORTS Empty Fully loaded final machine weight variate in agree with selected options Conversion chart CUMMINS B 4.5 120 KW Normet reserves the right to change this specification without further notice Pictures may include options and additional equipment.

 Open the catalog to page 9

All Normet catalogs and technical brochures

  1. MF 100

    12  Pages

  2. TamAcryl 2000

    2  Pages

  3. Alpha 30

    10  Pages

  4. Himec 9915 B

    6  Pages

  5. Minimec

    4  Pages

  6. BS 7622

    3  Pages

  7. Tornado

    5  Pages

  8. Alpha 15 TDH

    5  Pages

  9. Alpha 20

    6  Pages

  10. Scamec 2000 S

    5  Pages

  11. Utimec 1090 D

    3  Pages

  12. Multimec 6600

    3  Pages

  13. Multimec 1000

    3  Pages

  14. Himec 9915 BA

    4  Pages

  15. Himec 1905 B

    3  Pages

  16. Himec 1125 B

    3  Pages

  17. Himec 9905 BT

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.