Catalogs >
Normet >
Utilift MF 540

Utilift MF 540
9Pages

Catalog excerpts

Technical data sheet 100019818 13.06.2012 Pictured machine may include options and additional equipment. Features The Utilift MF 540 Scissor Lift with lifting capacity up to 4,5 tonnes is designed to provide a safe work platform for all kinds of installation works in tunnels up to 6,5 m (21 feet) high. Typical applications are fan installations, ventilation ducting, electrification works and piping for air and water services. Four platform sizes with side shift provide complete drift coverage from single setup practically in all kinds of mine headings. The works can be accomplished safely, efficiently and comfortably from the level work deck, elevated to a optimum work height. Optional remote drive system from the deck brings fully new type efficiency into installation and assembly works in underground mines. The powerful liquid cooled turbo charged Deutz 120 kW or MB 110 kW TIER 3 approved engine provides clean and efficient operation and gives maximum speed of 9 km/h in upward inclined 1:7 tunnel. In horizontal tunnel the maximum speed is 25 km/h. The FOPS and ROPS approved safety cabin provides superior visibility and comfortable compartment for the driver and his assistant. All daily checks and service functions can be done from the ground level. Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 1

Technical data sheet 100019818 13.06.2012 Utilift MF 540 Technical specification LIFTING PLATFORM FUEL TANK Dimensions 2000 X 4000 mm Lifting capacity 4500 kg Max. Lifting height 4500 mm Side shifting 550 mm Tilt +/-8º Diesel start/stop from platform Battery operated emergency pump Capacity 112 L HYDRAULIC SYSTEM Variable displacement pump system, 190 bar, 95 L/min/2200 rpm Hydraulic oil tank capacity 115 L Return oil filtration 10 μm Indication of level, filtration and temperature Liquid cooled turbo charged Deutz TCD 2013 L4, 120 kW/2300 rpm, TIER 3 approved Exposed components are min IP...

Open the catalog to page 2

Technical data sheet 100019818 13.06.2012 Utilift MF 540 Optional equipment Additional equipment LIFTING PLATFORMS 2400 X 4000: • Side shifting 650 mm • Lifting capacity 4500 kg • Tilt +/- 8º Turning radius: • Outer 6660 mm • Inner 3700 mm 2400 X 5200: • Side shifting 650 mm • Lifting capacity 4000 kg • Tilt +/- 8º Turning radius: • Outer 7200 mm • Inner 3700 mm Hydraulic pipe jacks: Lifting height from platform floor 1150 mm - 1750 mm Hydraulic pipe jacks with tilt: Lifting height from platform floor 1370 mm - 1820 mm Tilt +23º...+45º Crane: • Lifting capacity 12 kNm • Max platform...

Open the catalog to page 3

Technical data sheet 100019818 13.06.2012 Utilift MF 540 LTC services SPARE PARTS Spare parts package A: Available for 1000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Spare parts package B: Available for 3000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. * Recommendations are based on average hours - can vary a lot depending on work site conditions. TRAINING SERVICES Available before delivery, at start up and after delivery Product training: Operation and Maintenance NorSmart Foundation...

Open the catalog to page 4

Technical data sheet 100019818 13.06.2012 SIDE VIEW Basic machine SIDE VIEW Machine with options and enclosed cabin SIDE VIEW Machine with 2400X5200 platform, crane and pipe lifters Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 5

Technical data sheet 100019818 13.06.2012 TOP VIEW Basic machine TOP VIEW With 2400X5200 platform DIMENSIONS Length Width Height Wheel base Track Ground clearance as shown Outer Inner WEIGHT Operating Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 6

Technical data sheet 100019818 13.06.2012 TURNING RADIUS Basic machine TURNING RADIUS Machine with 2400X5200 platform Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 7

Technical data sheet 100019818 13.06.2012 LIFTING HEIGHT CRANE REACH Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 8