1. Catalogs
  2. Normet
  3. Utilift 6330 X
video corpo

Utilift 6330 X

Utilift 6330 X

Utilift 6330 X

Product catalog summary
Specifications:
The Utilift 6330 X TI 1800022 is a lifting platform vehicle with the following dimensions: length 7850 mm, width 1800 mm, height 2300 mm, wheelbase 3550 mm, track 1500 mm, and ground clearance 280 mm. It has an operating weight of 8000 kg and a turning radius of 6200 mm (outer) and 3950 mm (inner). The lifting platform has a capacity of 3000 kg and a height of 3500 mm, with hydraulic support legs on the rear frame and a diesel start/stop feature from the platform. An emergency pump is battery-operated.

Performance:
The vehicle features a performance curve (4800031) with a maximum speed of 5 km/h in 1st gear, 12 km/h in 2nd gear, and 25 km/h in 3rd gear. It has a maximum tractive effort of 90 kN.

Transmission and Axles:
The transmission is a Dana Spicer powershift with 3 speeds forward and reverse, and 4-wheel drive. The axles are planetary type, with a fixed rear axle and a front axle that oscillates +/- 10 degrees.

Tyres and Brakes:
The tyres are 10.00 - 20 PR 16. The service brake is a hydraulically powered two-circuit oil-immersed multidisc brake in both axles, while the safety/parking brake is a hydraulically released fail-safe type.

Steering and Hydraulics:
The vehicle uses hydraulic frame steering of the Orbitrol type, with frame articulation of +/- 40 degrees. The hydraulic system operates at 190 bar, 95 l/min/2200 rpm for steering and brakes.

Engine and Electrical System:
The engine is a Deutz TCD 2012 L4 with 96 kW/2200 rpm. The electrical system is 24 V negative ground, with a battery capacity of 2 x 110 Ah and an alternator of 80 A. The lighting system includes (2+2) x 70 W lights.

Options and Accessories:
Optional features include an enclosed cabin with adjustable height, cabin heating, air conditioning, an alternative engine (MB 904 LA, 90 kW/2200 rpm), a crane with a lifting capacity of 25.2 kNm, and a boom reach with varying lifting capacities. Additional options include hydraulic pipe jacks, an electro-hydraulic power pack, a cable reel with a 50 m cable, and a fast fuel filling system. Note that the Deutz engine is not available in Australia.
See more

Catalog excerpts

Utilift 6330 X-3

Utilift 6330 X TI 1800022 DRW DATE 04.12.2007 PAGE 3 / 4 APPR. 05.12.2007 Normet Corporation Ahmolantie 6 FI-74510 IISALMI, FINLAND Tel +358 (0) 17 83 241 Fax +358 (0) 17 823 606 DIMENSIONS Length 7850 mm Width 1800 mm Height 2300 mm Wheel base 3550 mm Track 1500 mm Ground clearance 280 mm WEIGHT Operating 8000 kg TURNING RADIUS Outer 6200 mm Inner 3950 mm LIFTING PLATFORM Lifting capacity 3000 kg Lifting height 3500 mm Hydraulic support legs on rear frame Diesel start/stop from platform Battery operated emergency pump PERFORMANCE CURVE 4800031 1st gear max. 5 km/h 2nd gear 12 km/h 3rd gear 25...

 Open the catalog to page 3

All Normet catalogs and technical brochures

  1. MF 100

    12  Pages

  2. TamAcryl 2000

    2  Pages

  3. Alpha 30

    10  Pages

  4. Himec 9915 B

    6  Pages

  5. Minimec

    4  Pages

  6. BS 7622

    3  Pages

  7. Tornado

    5  Pages

  8. Alpha 15 TDH

    5  Pages

  9. Alpha 20

    6  Pages

  10. Scamec 2000 S

    5  Pages

  11. Utimec 1090 D

    3  Pages

  12. Multimec 6600

    3  Pages

  13. Multimec 1000

    3  Pages

  14. Himec 9915 BA

    4  Pages

  15. Himec 1905 B

    3  Pages

  16. Himec 1125 B

    3  Pages

  17. Himec 9905 BT

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.