*mydirectindustry

Catalogs
Normet
Multimec 1000

Multimec 1000

Product catalog summary

Overview: The document provides technical specifications and features of the Multimec 1000 TI 1800017, a vehicle manufactured by Normet Corporation. It includes details on steering, hydraulics, engine, electrical system, dimensions, weight, turning radius, performance, transmission, axles, tyres, and brakes.

Steering: The vehicle features hydraulic frame steering with an Orbitrol type system, allowing frame articulation of +/- 40 degrees.

Hydraulics: The system operates at 190 bar with a flow rate of 100 l/min at 2200 rpm for steering and brakes, and 200 bar with 105 l/min at 2200 rpm for the mixer.

Engine: The standard engine is a Deutz TCD 2013 L4 with 120 kW at 2300 rpm. An optional engine is the MB 904 LA with 110 kW at 2200 rpm.

Electrical System: The vehicle uses a 24 V negative ground system, with two 110 Ah batteries and an 80 A alternator. Lighting includes four 70 W lights.

Options and Accessories: Available options include an enclosed cabin, cabin heating, air conditioning, and hydraulics for a mixer cassette.

Dimensions: The vehicle measures 7900 mm in length, 2000 mm in width, and 2250 mm in height, with a wheelbase of 3650 mm, a track of 1650 mm, and a ground clearance of 360 mm.

Weight: The operating weight is 9500 kg, with a maximum payload capacity of 10000 kg.

Turning Radius: The outer turning radius is 6400 mm, and the inner turning radius is 3900 mm.

Performance: The performance curve 17100043 indicates a maximum speed of 5 km/h in 1st gear, 10 km/h in 2nd gear, and 25 km/h in 3rd gear, with a maximum tractive effort of 132 kN.

Transmission: The vehicle is equipped with a Dana Spicer powershift transmission, offering 3 speeds forward and reverse, and features 4-wheel drive.

Axles: The axles are of the planetary type, with a fixed rear axle and a front axle that oscillates +/- 10 degrees.

Tyres: The vehicle is fitted with 12.00 - 20 PR 18 tyres.

Brakes: The service brake system consists of hydraulically powered two-circuit oil-immersed multidisc brakes on both axles. The safety/parking brake is a hydraulically released fail-safe type.

Catalog excerpts

Multimec 1000 TI 1800017 DRW DATE 20.11.2007 PAGE 3 / 3 APPR. 18.04.2008 Normet Corporation Ahmolantie 6 FI-74510 IISALMI, FINLAND Tel +358 (0) 17 83 241 Fax +358 (0) 17 823 606 STEERING Hydraulic frame steering, Orbitrol type Frame articulation +/- 40o HYDRAULICS 190 bar, 100 l/min/2200 rpm for steering and brakes 200 bar, 105 l/min/2200 rpm for mixer ENGINE Deutz TCD 2013 L4 120 kW/2300 rpm ELECTRICAL SYSTEM 24 V negative ground Battery 2 x 110 Ah Alternator 80 A Lights (2+2) x 70 W OPTIONS AND ACCESSORIES: ENCLOSED CABIN CABIN HEATING AIR CONDITIONING ENGINE MB 904 LA 110 kW/2200 rpm HYDRAULICS...

Open the catalog to page 3

All Normet catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list