1. Catalogs
  2. Normet
  3. Charmec MF 605 DA
video corpo

Charmec MF 605 DA
1 /7Pages

Charmec MF 605 DA

Charmec MF 605 DA
1 /7Pages

Catalog excerpts

Charmec MF 605 DA-1

Technical data sheet 100038660 11.09.2012 Pictured machine may include options and additional equipment. Features Charmec MC 605 ANFO charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m2 cross sections where max face height is 8,4 m. ANFO vessels options of 2 x 250 / 360 / 500 / 720 litres provides enough explosive storage volume for several faces without need for refuelling. Ready designed place for stick powder boxes, primers and detonators makes it possible to bring all the needed materials to the workplace at once and eliminates the need for an additional explosive service vehicle. Compressor option eliminates the need for external pressure air line. The liquid cooled turbo charged 110 kW TIER 3 approved engine provides clean and efficient operation and gives maximum speed of 25 km/h and 8 km/h in upward 1:7 inclined tunnel. The FOPS /ROPS approved safety canopy / cabin with pivotal operator's seat provides comfortable compartment for the driver and his assistant. The enclosed cabin provides noise level < 75 dB. Self extinguishing marine type wire harness with tinned wires and water tight conduits are specially designed for safe and reliable operation in tough underground conditions. All daily checks can be done from the ground level. Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

 Open the catalog to page 1
Charmec MF 605 DA-2

Technical data sheet 100038660 11.09.2012 Charmec MF 605 DA Technical specification CHARGING SYSTEM 2 ANFO vessels and work stand, 1 charging operator 500 liter stainless steel ANFO kettle Pressure max. 7 bar Extra air for charging Pneumatic hand and foot control for charging and blowing Pneumatic control in basket to switch between vessels Anfo hose 19 x 25 mm Earth straps front and rear Storage area for stick powder boxes Storage boxes for primers and detonators Service brake: hydraulically powered dual-circuit oil immersed multidisc brakes in both axles HYDRAULIC SYSTEM Safety/Parking brake:...

 Open the catalog to page 2
Charmec MF 605 DA-3

Technical data sheet 100038660 11.09.2012 Charmec MF 605 DA Optional equipment Additional equipment CHARGING SYSTEM CHARGING SYSTEM ANFO system: • 2 charging operators ANFO module: • ANFO filling system ANFO vessel size: • 250 L • 360 L • 720 L Radio controlled charging and blowing in basket: Optional for pneumatic control ANFO hose diameter: • For manual hose feeding 22x28 / 26,5x33,5 / 41,5x51 mm Additional pneumatic charging controls: For toe holes and ground level charging work 4 m3/min onboard diesel-hydraulic compressor BOOM OPERATION Dead man's pedal switch Prevents the boom operation...

 Open the catalog to page 3
Charmec MF 605 DA-4

Technical data sheet 100038660 11.09.2012 Charmec MF 605 DA LTC services SPARE PARTS Spare parts package A: Available for 1000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Special attention for parts that are crucial for charging process Spare parts package B: Available for 3000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Special attention for parts that are crucial for charging process * Recommendations are based on average hours - can vary a lot depending on work site conditions TRAINING...

 Open the catalog to page 4
Charmec MF 605 DA-5

Technical data sheet 100038660 11.09.2012 SIDE VIEW Basic machine SIDE VIEW Machine with options and enclosed cabin DIMENSIONS Length Width Height Wheel base Track Ground clearance Outer Inner WEIGHT Operating weight: Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

 Open the catalog to page 5
Charmec MF 605 DA-6

Technical data sheet 100038660 11.09.2012 BOOM REACH Lateral and vertical BOOM REACH Lateral and vertical Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

 Open the catalog to page 6
Charmec MF 605 DA-7

Technical data sheet Dimensions and Tractive efforts TURNING RADIUS GRADIENT TRACTIVE EFFORT vehicle weight [tn] speed [km/h] Normet reserves the right to change this specification without further notice._ FI-74510 IISALMI, FINLAND [email protected]

 Open the catalog to page 7

All Normet catalogs and technical brochures

  1. MF 100

    12  Pages

  2. TamAcryl 2000

    2  Pages

  3. Alpha 30

    10  Pages

  4. Himec 9915 B

    6  Pages

  5. Minimec

    4  Pages

  6. BS 7622

    3  Pages

  7. Tornado

    5  Pages

  8. Alpha 15 TDH

    5  Pages

  9. Alpha 20

    6  Pages

  10. Scamec 2000 S

    5  Pages

  11. Utimec 1090 D

    3  Pages

  12. Multimec 6600

    3  Pages

  13. Multimec 1000

    3  Pages

  14. Himec 9915 BA

    4  Pages

  15. Himec 1905 B

    3  Pages

  16. Himec 1125 B

    3  Pages

  17. Himec 9905 BT

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.