Catalogs >
Normet >
Charmec MC 605 D(V)

Charmec MC 605 D(V)
6Pages

Catalog excerpts

Technical data sheet 100012844 26.04.2012 Charmec MC 605 D(V) Diesel or electro hydraulic unit with boom and process platform Technical specification CHARGING SYSTEM Process platform and work stand rear end of unit Inner dimensions 1840 mm x 1900 mm Max load 2500 kg. Center of gravity shown in dimensional picture TYRES 12.00 - 20 PR 20 PERFORMANCE 1st gear max. 5 km/h 2nd gear 10 km/h 3rd gear 25 km/h Max. tractive effort 120 kN Max speed in upward 1:7 inclined tunnel 10 km/h Performance curve 4800030 NBB3S BASKET BOOM 2-men basket Lifting capacity 500 kg Boom lift -18º...+ 60º Max. Lifting height (basket floor) 6.4 m Max. Vertical reach 8,4 m Boom slew +/- 30° Automatic levelling of basket Diesel start/stop from basket Battery operated emergency pump for lowering the boom BRAKES Service brake: hydraulically powered dual-circuit oil immersed multidisc brakes in both axles Safety/Parking brake: spring applied hydraulically released fail-safe -type brake. Brake testing possible from cabin STEERING CONTROL SYSTEM Hydraulic frame steering Orbitrol type Frame articulation +/- 40° Integrated, seamless control and diagnostic system NorSmart for all machine functions. NorSmart controls: • Carrier functions • Boom functions • Charging process • Safety requirements • Fault diagnostics • Data logging FUEL TANK Capacity 112 L HYDRAULIC SYSTEM Variable displacement pump system 190 bar, 95 L/min/2200 rpm Hydraulic oil tank capacity 115 L Return oil filtration 10 μm Indication of level, filtration and temperature DRIVER’S COMPARTMENT Open 2-man cabin FOPS/ROPS approved Suspended driver’s and passenger's seat Seat with retractable (75 mm wide) lap seat belt The driver’s compartment with pivoting instrument console with driving controls and pedals Instrument console contain multi-informational color display Assembled in upper mounting height (2700 mm) 24 VDC ELECTRICAL SYSTEM Exposed components are min IP 65 standard Battery 2 x 115 Ah Alternator 100 A Driving halogen lights (4 + 2 pcs) 70 W Working lights: Halogen lights on cabin (4 pcs) 70 W LED working lights in basket (2 pcs) LED parking, brake and turning indicator lights Side reversing halogen lights (2 pcs) 70 W Rotating beacon, amber Wire harness (self extinguishing) with tinned wires and water tight conduits ENGINE Liquid cooled turbo charged Mercedes- Benz 904 LA, 110 kW/2200 rpm, TIER 3 approved EXHAUST SYSTEM Catalytic exhaust gas purifier and muffler TRANSMISSION Clark 24 000 series power shift with pump drive group 3 speeds forward and reverse 4-wheel drive GREASING SYSTEM 12 kg hand held fire extinguisher 2 pcs Standard symbol labels 2 pairs of support legs; extendable legs at the load end and standard at the engine end Centralized grease fittings for the carrier and boom OTHER Planetary type Dana 123 Load end axle fixed Engine end axle oscillation +/- 10° Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 1

Technical data sheet 100012844 26.04.2012 Charmec MC 605 D(V) Diesel or electro hydraulic unit with boom and process platform Optional equipment Additional equipment DRIVER’S CABIN CHARGING SYSTEM Enclosed cabin: Noise level in cabin LA = 75 dB • Upper assembly height: 2700 mm • Lower assembly height: 2400 mm Canopy: • Lower assembly height: 2400 mm Charging reel for face charging (controls of these equipment designed case by case) Mechanical EMU hose feeding for production charging: (controls of these equipment designed case by case) EMU hose diameter: • For face charging 20.4 x 25 mm, 10...

Open the catalog to page 2

Technical data sheet 100012844 26.04.2012 Diesel or electro hydraulic unit with boom and process platform LTC services SPARE PARTS Spare parts package A: Available for 1000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Special attention for parts that are crucial for charging process Spare parts package B: Available for 3000 h of use*. Include periodical service, most common wearing parts and most critical safety parts. Special attention for parts that are crucial for charging process * Recommendations are based on average hours - can vary...

Open the catalog to page 3

Technical data sheet 100012844 26.04.2012 Charmec MC 605 D(V) Diesel or electro hydraulic unit with boom and process platform SIDE VIEW Basic machine. SIDE VIEW Machine with options and extra equipment. TOP VIEW Machine with options and extra equipment. DIMENSIONS Length Width Height Wheel base Ground clearance as shown Outer Inner WEIGHT Operating Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 4

Technical data sheet 100012844 26.04.2012 Diesel or electro hydraulic unit with boom and process platform COVERAGE AREA OF NBB3S BASKET BOOM TURNING RADIUS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 5

Technical data sheet Diesel or electro hydraulic unit with boom and process platform Tractive efforts GRADIENT TRACTIVE EFFORT vehicle weight [tn] speed [km/h] Normet reserves the right to change this specification without further notice.

Open the catalog to page 6

Charmec MC 605 D(V) 6Pages

Catalog excerpts

All Normet catalogs and technical brochures

Charmec MC 605 D(V)
6Pages