video corpo

TamAcryl 3000
2Pages

{{requestButtons}}

Catalog excerpts

TamAcryl 3000 - 1

High Solids Injection Gel DESCRIPTION TECHNICAL DATA TamAcryl 3000 is a high solids content blend of acrylic polymers in conjunction with a latex modified catalyst system. Upon mixing of the components, a chemical reaction occurs and a waterproof polymer compound is formed. It is available in standard and slow set grades. KEY BENEFITS > Water based > Ultra-low viscosity > Highly resilient > Flexible > Not affected by sea water or sewage > Swelling capacity up to 5% TYPICAL APPLICATIONS > Sealing ultra-fine joints and cracks > Sealing against water ingress > Soil stabilisation > Void filling

Open the catalog to page 1
TamAcryl 3000 - 2

TamAcryl 3000 High Solids Injection Gel Page 2 of 2 APPLICATION GUIDELINES TamAcryl 3000 is supplied as four components, Part A Resin, Part B Latex, Initiator and Accelerator. Using the gel times table overleaf and cup sample as a guide, add the Accelerator to Part A mixing until homogenous. Do not mix more than will be used within 24 hours. Add the initiator to the Part B, allowing at least 20 minutes to disperse. Agitate regularly during this time. Do not mix more than will be used in 24 hours. Shake containers thoroughly before use. Pumping TamAcryl 3000 is injected at a ratio of 1:1...

Open the catalog to page 2

All Normet Group OY catalogs and technical brochures

  1. utimec-mf-660-

    13 Pages

  2. utimec-mf-100

    15 Pages

  3. rbo

    6 Pages

  4. MF 100

    12 Pages

  5. TamCem 23SSR

    2 Pages

  6. TamCem 9BFG

    2 Pages

  7. TamCem 8BFG

    2 Pages

  8. Alpha 30

    10 Pages

  9. D-Bolt ©

    7 Pages

  10. Himec 9915 B

    6 Pages

  11. Minimec

    4 Pages

  12. BS 7622

    3 Pages

  13. Tornado

    5 Pages

  14. Alpha 15 TDH

    5 Pages

  15. Alpha 20

    6 Pages

  16. Himec 1905 B

    3 Pages

  17. Himec 1125 B

    3 Pages