video corpo

TamAcryl 2000
2Pages

{{requestButtons}}

Catalog excerpts

TamAcryl 2000 - 1

TamAcryl 2000 is a blend of acrylic polymers used in conjunction with an accelerator and catalyst system. Upon mixing of the components, a chemical reaction occurs and a waterproof gel is formed. It is available in two grades - standard and slow set. KEY BENEFITS > Ultra-low viscosity > Swells up to 5% upon contact with water > Very Flexible > 100% > Good chemical resistance > Reacts even in the presence of mineral and saline conditions > Potable water certified > Incorporates anti-corrosion agents TYPICAL APPLICATIONS > Leak sealing > Injection tubes > Void filling > Soil stabilisation > Tightening up normet CONSTRUCTION CHEMICALS TECHNICAL DATA SHEET TECHNICAL DATA Reaction Times The reaction time can be varied to suit prevailing conditions. To ascertain accelerator dosage required use 2 clean disposable containers e.g. plastic cups used in vending machines. Pour an equal amount of Part A and Part B into separate containers, each container should be able to hold the contents of the other, see below. Using the reaction table as a guide, add the accelerator to the Part A and mix. Pour one container into the other repeatedly until the material gels. Use this as a guide to judge accelerator dosage.

Open the catalog to page 1
TamAcryl 2000 - 2

TamAcryl 2000 n rmet Chemical resistance (42 days immersion at 25°C) APPLICATION GUIDELINES TamAcryl 2000 is injected at a ratio of 1:1 Part A: Part B by volume. Ideally using a Twin Piston Pump such as TP2 / TP4 Pump or if extremely careful a single component pump. Cleaning involves using water to remove the resin before it sets. Note: Once the accelerator is added to the Part A it should be used within 24 hours. YIELD 1 kg = 0.92 litres STORAGE TamAcryl 2000 should be stored at room temperature (min 4°C and max 30°C), kept dry and out of direct sunlight. If these conditions are...

Open the catalog to page 2

All Normet Group OY catalogs and technical brochures

  1. utimec-mf-660-

    13 Pages

  2. utimec-mf-100

    15 Pages

  3. rbo

    6 Pages

  4. MF 100

    12 Pages

  5. TamCem 23SSR

    2 Pages

  6. TamCem 9BFG

    2 Pages

  7. TamCem 8BFG

    2 Pages

  8. Alpha 30

    10 Pages

  9. D-Bolt ©

    7 Pages

  10. Himec 9915 B

    6 Pages

  11. Minimec

    4 Pages

  12. BS 7622

    3 Pages

  13. Tornado

    5 Pages

  14. Alpha 15 TDH

    5 Pages

  15. Alpha 20

    6 Pages

  16. Himec 1905 B

    3 Pages

  17. Himec 1125 B

    3 Pages