video corpo

utimec-mf-100-e-
12Pages

{{requestButtons}}

Catalog excerpts

utimec-mf-100-e- - 1

Technical Data Sheet 100150854 23.01.2019 100xxxxxx | 05.05.2021 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 1
utimec-mf-100-e- - 2

Introduction MF 100 E is designed for explosives transportation in underground mines and tunnels. Vehicle have rubber lined platform and separated compartment for detonators. Power train M-series units have powerful 4-cylinder liquid cooled turbocharged engines, which power range is between 110–121 kW, depending of the selected engine model. Available emission standards are Tier 3 / Stage IIIA and Stage V that provide clean and efficient operation. Machine is equipped with Dana hydrodynamic transmission and planetary type axles which have hydraulically powered dual-circuit oil immersed...

Open the catalog to page 2
utimec-mf-100-e- - 3

Technical specification MATERIAL PLATFORM ○ Cummins B4.5, 121 kW/2500 rpm with exhaust brake, STAGE V approved Carrying capacity 10 000 kg ● Rubber insulated material platform with personnel compartment: ● Open personnel compartment ○ Enclosed personnel compartment Requires diesel exhaust fluid (DEF) and ultra-low sulphur diesel (ULSD) Diesel particulate filter (DPF) DEF tank capacity Fuel tank capacity Bench with retractable seat belts for 4 persons Personnel compartment door safety interlock switch ○ Warning signal ○ Safety brake application ○ Full length rubber insulated material...

Open the catalog to page 3
utimec-mf-100-e- - 4

Technical specification HYDRAULIC SYSTEM Throttle and brake pedal layout: ● Front and side facing pedals with seat swivel ○ Front facing pedals Variable displacement pump system: Gear lever side: ● On right side of the steering wheel ○ On left side of the steering wheel 190 bar, 135 l/min at 2200 rpm Hydraulic oil tank capacity TECHNICAL DOCUMENTATION Main switch ● Mechanical switch in battery box ○ Electric switch with control in cabin and service switch in battery box ○ Electric switch with control in cabin, start isolator and service switch in battery box Standard documents: Instruction...

Open the catalog to page 4
utimec-mf-100-e- - 5

PROCESS PRODUCTIVITY ○ 0,4 m3/min compressor with hose reel, air tank and tyre filling pistol ○ 4 m3/min hydraulic driven compressor on front rack ○ Tarpaulin cover for platform ○ Steel cover for platform ○ Hydraulic front support legs ○ Pressure washer with 230 l tank on cabin roof (increases cabin height by 250 mm) ○ Cabin door safety interlock switches: ○ Safety brake application ○ Puddle lights ○ Extra warning LED light (From the options below it is possible to choose 1-2 combinations) Color ● Amber ○ Blue ○ Red ○ Green (n/a with rotating light pattern) ○ White (n/a with rotating light...

Open the catalog to page 5
utimec-mf-100-e- - 6

Service NORMET SERVICES Our Upgrades and Modifications services are designed to ensure the economical, efficient and purposeful performance of your equipment over its entire life cycle. A service provided by a reliable OEM like Normet ensures the safety and performance of your equipment. Normet Upgrades and Modifications save you both time and money, while delivering the high quality you expect from us. Our services cover the whole life cycle of your equipment. They include start-up and commissioning, genuine spare parts, upgrades & modifications, and remanufacturing, as well as rental and...

Open the catalog to page 6
utimec-mf-100-e- - 7

Equipment Start-up and commissioning Start-up training General introduction and operation of machine Safety instructions Basic Use of manuals Basic training included in Technical introduction of equipment Hands-on service and pre-operation checks Controls and driving Basic (starting, driving, stopping, parking) Pre-operation checks Basic Introduction Driving, starting, stopping, parking Basic Introduction Preparing the machine for specific operation conditions Operation Basic Introduction Washing the machine Basic Introduction Troubleshooting Basic Basic 2. MAINTENANCE AND REPAIR TRAINING...

Open the catalog to page 7
utimec-mf-100-e- - 8

Dimensions DIMENSIONS Length Width Height Height of cabin Wheel base Track Ground clearance as shown TURNING RADIUS Outer Inner SIDE VIEW – BASIC MACHINE SIDE VIEW – MACHINE WITH OPTIONS Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 8
utimec-mf-100-e- - 9

Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 9
utimec-mf-100-e- - 10

Tractive efforts OPERATING WEIGHT Empty Fully loaded DEUTZ TCD 2013 L4, 120 KW Performance curve: DOC060005 MERCEDES-BENZ OM 904 LA 110 KW Performance curve with lock-up D100006272 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 10
utimec-mf-100-e- - 11

100150854 05.05.2021 CUMMINS B 4.5 121 KW Performance curve with lock-up DOC028557 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 11
utimec-mf-100-e- - 12

Technical Data Sheet 100150854 23.01.2019 100xxxxxx | 05.05.2021 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND Pictures may include options and additional equipment.

Open the catalog to page 12

All Normet Group OY catalogs and technical brochures

  1. utimec-mf-660-

    13 Pages

  2. utimec-mf-100

    15 Pages

  3. rbo

    6 Pages

  4. MF 100

    12 Pages

  5. TamCem 23SSR

    2 Pages

  6. TamCem 9BFG

    2 Pages

  7. TamCem 8BFG

    2 Pages

  8. Alpha 30

    10 Pages

  9. D-Bolt ©

    7 Pages

  10. Himec 9915 B

    6 Pages

  11. Minimec

    4 Pages

  12. BS 7622

    3 Pages

  13. Tornado

    5 Pages

  14. Alpha 15 TDH

    5 Pages

  15. Alpha 20

    6 Pages

  16. Himec 1905 B

    3 Pages

  17. Himec 1125 B

    3 Pages