video corpo

scamec-2000-m-stage-iiia-tds-2020
8Pages

{{requestButtons}}

Catalog excerpts

scamec-2000-m-stage-iiia-tds-2020 - 1

Technical data sheet 100159883 21.09.2020 Pictured machine may include options and additional equipment. Features Scamec 2000 M is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4 m or more. Scamec consist of NC200 carrier, NSB1000 boom, scaling tool and other scaler accessories. The powerful liquid cooled turbo charged 155 kW Deutz or MB 170 kW TIER 3 approved engine provides clean and efficient operation. MB gives a maximum speed of 7 km/h in an upward inclined 1:7 tunnel. In a horizontal tunnel, the maximum speed is 17 km/h. The FOPS and ROPS approved safety cabin provides superior visibility and comfortable compartment for the driver. The enclosed cabin provides noise level < 75 dB. All daily checks can be done from the ground level. Technical performances indicated in this document are valid at sea level. Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 1
scamec-2000-m-stage-iiia-tds-2020 - 2

Technical data sheet 100159883 21.09.2020 Scamec 2000 M Technical specification NORMET SCALING BOOM NSB1000 Heavy duty telescopic scaling boom Max. vertical reach of hammer Max. horizontal reach of hammer Boom slew Hammer turn Hammer tilt PERFORMANCE 1st gear max. 2nd gear 3rd gear Max. tractive effort Max speed in 1:7 inclined tunnel Performance curve BOOM CONTROL Hydraulic pilot control with Deutz engine or Electrical control with MB engine Two joysticks Hydraulic frame steering Orbitrol type Frame articulation +/- 40° SCALING TOOLS FUEL TANK Epiroc (Atlas-Copco) SB302 Tunnel, hydraulic...

Open the catalog to page 2
scamec-2000-m-stage-iiia-tds-2020 - 3

Technical data sheet 100159883 21.09.2020 Scamec 2000 M Technical specification DRIVER’S COMPARTMENT Enclosed one-man cabin FOPS/ROPS approved Optional heater/Air Conditioning system Cabin lift: + 600 mm Cabin tilt: 15o Air suspended seat for driver Seat with retractable lap seat belt Driving controls and a set of pedals CANCockpit, Master Gauge: • Tacho, rpm • Operating hours • Fuel level • Transmission temperature • Cooling water temperature GREASING SYSTEM Centralized grease fittings for the carrier Ramlube lubrication system for hammer OTHER 12 kg hand held fire extinguisher Standard...

Open the catalog to page 3
scamec-2000-m-stage-iiia-tds-2020 - 4

Technical data sheet 100159883 21.09.2020 Scamec 2000 M Optional equipment Additional equipment BOOM CONTROL HIGH VOLTAGE ELECTRICAL SYSTEM Electric control with two joysticks available only with Mercedes-Benz engine and enclosed cabin Electro-hydraulic 55 kW power pack for powering the scaling boom including: Hydraulically driven cable reel with 100 m cable SCALING TOOLS Normet pick unit Rotating Normet pick unit Turnable push plate SCALING TOOLS Normet pick unit Rotating Normet pick unit Hammer maintenance tools for: • Epirock (Atlas-Copco) SB302 Tunnel FOR SCALING PROCESS Water tank 200...

Open the catalog to page 4
scamec-2000-m-stage-iiia-tds-2020 - 5

Technical data sheet 100159883 21.09.2020 Scamec 2000 M Service OPERATIONAL SPARE PARTS ELECTRONIC MANUALS A complete parts package to ensure your machine runs with optimal uptime. LinkOne electronic spare parts and instruction manuals EQUIPMENT - COMMISSIONING & START UP SERVICES After commissioning of your new Normet equipment, the following maintenance & critical spares are typically recommended to support and service your machine: • • • • • Operator Training • Class room training • Practical training Filters, belts Sensors, work lights, solenoid coils and fuses Sliding parts, bearings,...

Open the catalog to page 5
scamec-2000-m-stage-iiia-tds-2020 - 6

Technical data sheet 100159883 21.09.2020 SIDE VIEW Basic machine TOP VIEW Machine with options and extra equipment DIMENSIONS Length Width Height (standard) Wheel base Ground clearance as shown Outer Inner WEIGHT Operating weight: Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 6
scamec-2000-m-stage-iiia-tds-2020 - 7

Technical data sheet 100159883 21.09.2020 BOOM REACH Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 7
scamec-2000-m-stage-iiia-tds-2020 - 8

Technical data sheet 100159883 21.09.2020 Scamec 2000 M Tractive efforts DEUTZ TCD 2012 L6, 155 kW Performance curve DOC000805 MERCEDES-BENZ OM 906 LA, 170 kW Performance curve 100003433 Normet reserves the right to change this specification without further notice. Normet Oy Ahmolantie 6 FI-74510 IISALMI, FINLAND

Open the catalog to page 8

All Normet Group OY catalogs and technical brochures

  1. utimec-mf-660-

    13 Pages

  2. utimec-mf-100

    15 Pages

  3. rbo

    6 Pages

  4. MF 100

    12 Pages

  5. TamCem 23SSR

    2 Pages

  6. TamCem 9BFG

    2 Pages

  7. TamCem 8BFG

    2 Pages

  8. Alpha 30

    10 Pages

  9. D-Bolt ©

    7 Pages

  10. Himec 9915 B

    6 Pages

  11. Minimec

    4 Pages

  12. BS 7622

    3 Pages

  13. Tornado

    5 Pages

  14. Alpha 15 TDH

    5 Pages

  15. Alpha 20

    6 Pages

  16. Himec 1905 B

    3 Pages

  17. Himec 1125 B

    3 Pages