Specifications:
The Norman 30K Series In Line High Pressure Filters are designed to operate at pressures up to 30,000 PSI. The housing is made from 17-4 stainless steel, ensuring durability and resistance to high pressure. The filter elements are available in pleated stainless steel, sintered stainless steel, and glass fiber, offering a range of micron ratings from 0.5 to 300 microns for optimal dirt holding capacity.

Element Media:
- 304 Stainless Steel Mesh: Available in 10, 18, 25, 40, 75, 150, and 300 micron ratings.
- 316 Stainless Steel Mesh: Available in 0.5, 1, 3, and 7 micron ratings.
- Glass Fiber: Available in 3, 5, and 10 micron ratings.

Flow Rate:
- 0.250 High Pressure: 2.5 GPM (100 SSU oil)
- 0.375 High Pressure: 5.5 GPM (100 SSU oil)

Pressure Ratings:
- Operating Pressure: 30,000 PSI
- Proof Pressure: 45,000 PSI
- Burst Pressure: 120,000 PSI

Temperature Ranges:
- Housing: -148°F to +350°F
- 304 Stainless Mesh: -425°F to +1,000°F
- 316 Stainless Sintered: -425°F to +1,000°F
- Glass Fiber: -70°F to +300°F
- O-Rings: Buna-N (-40°F to +250°F), Viton (-20°F to +350°F), Ethylene Propylene (-65°F to +300°F), Teflon™ (-148°F to +400°F), Kalrez™ (-40°F to +600°F)

Ordering Information:
The document provides a detailed guide on how to order replacement elements and specifies the codes for micron ratings, collapse ratings, and O-ring materials. The filters are ISO 9001:2000 certified, ensuring quality and reliability.