V-groove measuring kit
2Pages

Quick Measuring of Flange Grooves No Calibration Needed Prior Use Light and Comfortable to Handle Durable Construction V-groove measuring Kit is used for measuring groove diameter & width and depth of the groove on a RTJ or compact flange. Measuring Arc The measuring arc is used with the V-groove kit to measure the groove dimensions on flanges. The Arc offers the additional benefit of being able to measure the groove diameter, while the ID mounted flange facer is mounted on the flange. The arc offers wide measuring capability, up to 1196mm in diameter. The kit comes with two connecting rods, that allow for measuring of maximum groove diameter of 440mm. The short rod allows the kit to be used with small OD mounted flange facing machines. Normaco V-groove measuring kit is built to be easy and comfortable to use. There is no need to calibrate the device after changing the measurement balls, saving time on-site. The measurement balls have corrosion resistant surface coating giving the kit long life time. The kit is typically used with the inspection charts (not included) that give the operator the quick reference to check if the measurement is within the allowed tolerance.

V-Groove Measuring kit & Arc Contents of the V-groove kit Special Analogue Depth Micrometer Holder Block Technical Data: Shipping weight Screws for fixing Balls Block Fixing Thumb Screw Factory Inspection Certificate Shipping dimensions Part Number Arc configuration with blocks mounted outwards Arc configuration with blocks mounted inwards Normaco Tools OÜ Sinikivi tee 12 Lehmja küla, Rae vald 75306, Estonia sales@normaco-tools.com +372 6003704