TORRO®
11Pages

{{requestButtons}}

Catalog excerpts

TORRO® - 1

Worm Drive Hose Clamps - Plain Band Improved asymmetric housing –– even distribution of forces and safe assembly Screw support – ase of assembly due to the safe guidance of the emerging band end e Material and clamping range stamped on the band – prevention of errors Asymmetric extension – revents the housing from tilting over when the clamp is tightened p Short housing saddle – even contact pressure S mooth or stamped inside of band – optimal hose protection Worm drive hose clamps in accordance with DIN 3017 NORMACLAMP® TORRO® multi-range hose clamps are ideally suited to applications with high mechanical loads. Thanks to the continuous developments these products have undergone, they remain the benchmark within modern clamp construction. Within the NORMACLAMP® range, only the TORRO® has its trademark asymmetrical construction. The asymmetric housing provides high force, superior torque and even distribution of clamping pressure. Clamp aligns perfectly on the hose and ensures the optimal sealing of the connection. Multi-range hose clamp No chromium(VI) used for coating purposes Clamping ranges in acc. with DIN 3017: 8-12 mm to 140-160 mm Larger diameters available on request Types of clamp band and screw W2 x Corrosion resistance in salt spray testing *Max 10% base metal corrosion permissible * No chromium(VI) used for the coating on the closure components Material Joining cooling water lines Depressurized and pressurized fuel lines and ventilation systems Oil lines Joining lines in sanitary applications Joining lines in machine building applications Lines in the household appliance industry Hose lines in the commercial vehicle industries Phillips head Slotted head Band width 7.5 mm • W2, W3 with smooth inside Band width 9 mm • W1 with smooth inside • W2, W3, W4, W5 with stamped inside Band width 12 mm • W1, W2, W3 with smooth inside • W4, W5 with stamp

Open the catalog to page 1
TORRO® - 2

NORMACLAMP®® NORMACLAMP Worm Drive Hose Clamps - Plain Band Technical data & Ordering information NORMACLAMP® TORRO® Clamping ranges Width Designation 7.5 W1 W2 W3 W4 W5 Product No. Product No. Product No. Product No. Product No. Additional diameters on request (up to 700 mm) TORRO Type B = overall width housing h = overall height bolt and housing L = overall length bolt and housing www.normagroup.c

Open the catalog to page 2
TORRO® - 3

Worm Drive Hose Clamps - Plain Band I won’t take the page away until I have made the page changes and the adding of products.

Open the catalog to page 3
TORRO® - 4

TORRO® WF (WAVE SPRING) The TORRO® WF clamp is fitted with a wave spring which automatically re-tensions to ensure optimal radial clamping force. The TORRO® WF is the ideal choice for applications under extreme temperature changes (e.g. charged air), under extremely low temperatures or for the retention of hoses with a tendency of “creeping”/ hose relaxation. Advantages at a glance • Automatic re-tensioning effect in the event of hose relaxation • Increased sealing reliability across a wide temperature range Materials W3, W4 NORMACLAMP® TORRO® WF Designation Clamping ranges in mm in inches

Open the catalog to page 4
TORRO® - 5

Worm Drive Hose Clamps - Plain Band Table of torques TORRO 7.5 W2-W3 Diameter TT

Open the catalog to page 5
TORRO® - 6

NORMACLAMP®® NORMACLAMP Worm Drive Hose Clamps - Plain Band The torque cap shears off when the permissible tightening torque is reached, thus saving the need to use a torque wrench. The bolt slot can still be accessed even after the break-off point, meaning that the clamp can be removed and/or re-tensioned if necessary. Advantages at a glance • Defined tightening torque without the need for special tools • Installation can be checked visually Materials W1, W2, W3, W4 NORMACLAMP® TORRO® WITH TORQUE CAP Clamping ranges TORRO TORQUE CAP 60-80/9 TORRO TORQUE CAP 70-90/9

Open the catalog to page 6
TORRO® - 7

TORRO® THUMB SCREW Worm Drive Hose Clamps - Plain Band The NORMACLAMP® TORRO® Thumb screw can be comfortably tightened by hand using the wide screw head. Main advantage The clamp can be tightened or opened manually Materials W1, W2, W3, W4, W5 NORMACLAMP® TORRO® THUMB SCREW Clamping ranges W1 W2 W3 W4 W5 Product No. Product No. Product No. Product No. Product No. TORRO THUMB SCREW 20-32/9 TORRO THUMB SCREW 23-35/9 TORRO THUMB SCREW 25-40/9 TORRO THUMB SCREW 30-45/9 TORRO THUMB SCREW 35-50/9 (32-50) TORRO THUMB SCREW 40-60/9 TORRO THUMB SCREW 50-70/9 TORRO THUMB SCREW 60-80/9 TORRO THUMB...

Open the catalog to page 7
TORRO® - 8

TORRO® TAMPERPROOF NORMACLAMP®® NORMACLAMP Worm Drive Hose Clamps - Plain Band The NORMACLAMP® TORRO® Tamperproof can only be mounted and dismounted by using the Tamperproof Screwdriver – details on page 199. The specially designed screw head has three radial grooves, which means it cannot be adjusted with any commercially available tools. Automated assembly using a torque gun is particularly effective, as the special shape of the screw head allows for minimal misalignment or offset. Main advantage Non-dismountable clamps protect against manipulation Materials W3, W4 NORMACLAMP® TORRO®...

Open the catalog to page 8
TORRO® - 9

TORRO® – Versions Worm Drive Hose Clamps - Plain Band The notch is a clever means of pre-positioning the TORRO® hose clip on the hose. In this case the oval hole in the clamp band finds its exact counterpart on the hose surface. Thus the TORRO® is safely and accurately kept in place prior to the final assembly. Available in band widths of 9 and 12 mm and different angles on request. Main advantage Safe pre-assembly on rubber sleeves and molded pipes Material W3 Prefix system The NORMACLAMP® TORRO® Prefix system is a concept for integrated clamps and clips on hoses and pipes. Demand for...

Open the catalog to page 9
TORRO® - 10

TORRO® – Versions NORMACLAMP®® NORMACLAMP Prefix clip Worm Drive Hose Clamps - Plain Band With this feature the TORRO® can also be pre-positioned on the hose. The two ‘teeth’ of this device keep the TORRO® hose clip safely in place if it needs to be stocked or transported prior to its final assembly. Available in band widths of 9 and 12 mm on request. Advantages at a glance • Safe pre-assembly on the hose • Two versions, left- and right-handed Materials W3, W4 Prefix Double clip With this feature the TORRO® can also be pre-positioned on the hose. The ‘teeth’ of the clips keep the TORRO®...

Open the catalog to page 10

All NORMA GROUP catalogs and technical brochures

  1. NORMETTA®

    4 Pages

  2. RS/RSGU

    9 Pages

  3. S/SP

    3 Pages

  4. ABA NOVA

    2 Pages

  5. NORMAFLEX®

    6 Pages

  6. TWIST II

    3 Pages

  7. SEC

    1 Pages

  8. ARS

    2 Pages

  9. CABLE TIES

    2 Pages

  10. V2

    2 Pages

  11. PS3

    2 Pages

  12. UniStrap

    1 Pages

  13. TorcTite

    1 Pages

  14. EasySeal

    1 Pages

  15. DuraSeal

    1 Pages

  16. BRS / BRSP

    1 Pages

  17. RS/DIN

    2 Pages

  18. RFP

    1 Pages

  19. COMBI GRIP

    3 Pages

  20. DCS RAPID

    1 Pages

  21. DCS CV/CE

    1 Pages

  22. ABA APAC

    48 Pages

  23. ABA Americas

    48 Pages

  24. Cooling System

    23 Pages

Archived catalogs

  1. FBS

    3 Pages

  2. ABA MINI

    2 Pages

  3. ABA SAFETM

    2 Pages

  4. HD

    1 Pages

  5. TX

    4 Pages

  6. ABA NOVA

    2 Pages

  7. ABA ORIGINAL

    2 Pages

  8. Aviation

    17 Pages

  9. ABA

    68 Pages