Catalogs >
NORMA GROUP >
NORMA Compression Fittings_Australia

NORMA Compression Fittings_Australia
28Pages

Catalog excerpts

NORMA Compression Fittings_Australia - 3

Contents FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP FIT PP CERTIFICATIONS PRODUCT PORTFOLIO PUSH FIT COMPRESSION FITTINGS SUMMARY INSTALLATION INSTRUCTIONS & ABBREVIATIONS PRODUCT RANGE push FIT PP male threaded adaptor (MA) push FIT PP FEMALE THREADED ADAPTOR (FA) PuSH FIT PP MALE THREADED TEE (MT) PuSH FIT PP FEMALE THREADED TEE (FT) PuSH FIT PP MALE THREADED Elbow - MALE Bend 90 (Mb) PuSH FIT PP FEMALE THREADED ELBOW - FEMALE BEND 90 (FB) PuSH FIT PP STRAIGHT COuPLER (SC) PuSH FIT PP EQuAL BEND (EB) push FIT PP equal TEE (ET) push...

Open the catalog to page 3

NORMA Compression Fittings_Australia - 4

Our quality assurance program is documented in an approved quality assurance manual and covers all manufacturer, sales and services procedures. Stringent control of dimension and mechanical properties, starting from the raw material and following right through all production steps to laboratory testing, as the final product is examined in order to maintain the high quality of products. Material Control System This system controls the quality of all incoming material. The incoming material specifications are co-related with Raw Material test certificates of the material and the checks are...

Open the catalog to page 4

NORMA Compression Fittings_Australia - 5

NORMA Pacific is a member of the NORMA Group – the world leader in engineered joining technology. Our strengths lie in our high quality, broad and innovative product portfolio which enables us to be a leading supplier for the irrigation, industrial and automotive markets. Our regional and international presence, combined with decades of know-how, contributes to our customers’ success and overall satisfaction. As with all NORMA ranges, you can rest assured that each product is of superior design and manufacturing excellence. We continuously test, evaluate and improve each one of our products...

Open the catalog to page 5

NORMA Compression Fittings_Australia - 6

PUSH FIT COMPRESSiON FiTTiNGS Our wide range of NORMA push fit compression fittings ensure fast and safe connections of poly pipe for all your industrial, commercial and domestic needs. • push fit - No need to remove nut • Quick assembly • Durable, high impact strength materials • pipe backstop prevents over insertion • Built-in anti pipe rotation wedges • Wide range of sizes and types • uv resistant • approved for potable water applications • Meets international standards (iSO/BS/ASNZ/MS/DiN) note: nuts specifically for recycled water (lilac coloured) are available upon request. HOW...

Open the catalog to page 6

NORMA Compression Fittings_Australia - 7

1. Cut the pipe square with a proper pipe cutter. Clean the burr at the pipe end. .. please NoTE: The ‘o’ Ring must be in the relaxed position to enable insertion. D = internal diameter DN = Nominal Diameter G = Thread size (BSP) GM = Grams mm = Millimetres OD =Outside diameter PC = Piece

Open the catalog to page 7

NORMA Compression Fittings_Australia - 8

FITTINGS PRODUCT RANGE

Open the catalog to page 8

NORMA Compression Fittings_Australia - 13

LOCAL NUMBER

Open the catalog to page 13

NORMA Compression Fittings_Australia - 15

PUSH FIT PP STRAIGHT COUPLER (SC) LOCAL NUMBER

Open the catalog to page 15

NORMA Compression Fittings_Australia - 16

LOCAL NUMBER

Open the catalog to page 16

NORMA Compression Fittings_Australia - 17

LOCAL NUMBER

Open the catalog to page 17

NORMA Compression Fittings_Australia - 18

LOCAL NUMBER

Open the catalog to page 18

NORMA Compression Fittings_Australia - 20

LOCAL NUMBER

Open the catalog to page 20

NORMA Compression Fittings_Australia - 21

2. tighten all bolts, nuts and washers onto the stem gate valve. 1. Dismantle the Flange Adaptor's components before fixing onto stem gate valve. 3. assembly of the set components before pipe insertion. The locking nut can be tightly fastened by hand, with a tool or a strap wrench. 4. Mark the insertion depth on the pipe according to the ‘Insertion table'. 5. Loosen the locking nut by one or two threads then insert the pipe into the fitting to the correct depth according to the ‘Insertion table'. 7. A Flange Adaptor tightened to a stem gate valve or onto a vertical in-line pump. NOTE: •...

Open the catalog to page 21

NORMA Compression Fittings_Australia - 22

LOCAL NUMBER LOCAL NUMBER

Open the catalog to page 22

NORMA Compression Fittings_Australia - 23

PUSH FIT PP MALE THREADED ADAPTOR WITH BRASS INSERT (MAB)

Open the catalog to page 23

NORMA Compression Fittings_Australia - 25

Standard Dimension Ratio (SDR) = Outside Diameter (D) Divide (/) Wall Thickness (S) Example - pE100, pN16, 110 mm outside diameter x 10.0 mm wall thickness = 110/10.0 = 11 (sdr11) D = pipe outside diameter (mm) S = pipe wall thickness (mm) A SDR 11 means that the outside - D - of the pipe is eleven times the thickness - S - of the wall. • With a high sdr the pipe wall is thin compared to the pipe diameter • With a low sDR the pipe wall is thick compared to the pipe diameter The higher the sDR, the thinner the pipe and the lower the pressure rating. The term sDR is more widely accepted...

Open the catalog to page 25

NORMA Compression Fittings_Australia - 26

AS STANDARD PRESSURE ANSi

Open the catalog to page 26

NORMA Compression Fittings_Australia - 27

Guyco is a Norma Group company

Open the catalog to page 27

NORMA Compression Fittings_Australia - 28

Guyco is a Norma Group company Guyco Pty Ltd (head office) 22 - 24 Furness avenue Edwardstown sA 5051 austraua Tel: 1800 245 400 Fax: 1800 659 131 Email: sales@guyco.com.au Web: www.guyco.com.au NORMA Pacific (Australia) Pty Ltd ABN 42 054 880 769 85 Merrindale Drive Croydon South ViC 3136 AUSTRAUA Tel: +61 3 9761 4416 Fax: +61 3 9761 4030 Email: sales.au@normagroup.com Web: www.normapacific.com

Open the catalog to page 28