Hexagonal socket bolt with washer Square nut Closure unit Collar Sealing sleeve NORMACONNECT® The original Rapid with block tightening The DCS RAPID with block tightening for non-pull-out resistant connections enables a fast connection. The visible torque control and the single-bolt closure provide for a fast and easy installation. Material, Collar: AISI 430 Ti Material, Clamping unit: AISI 304 / AISI 430 Ti Material, Bolts/Nuts: Steel, surface protected Material, Sealing sleeve: EPDM Resisting axial pull-out forces up to max. 0.5 bar DN 40 - DN 200 Resisting axial pull-out forces up to max 0.3 bar DN 250 - DN 300 Defined locking torque without using a special tool Meeting the fire protection requirements Technical data & Ordering information RAPID DN 50 50 70 80 46 0.5 Tight-Locking M 8 0245 8218 050 0245 8126 050