Catalogs >
NORMA GROUP >
COMBI GRIP

COMBI GRIP
3Pages

Catalog excerpts

Infrastructure Connectors - FGR Double-lip sealing system 3 Standard strip insert 3 Anchoring ring The combining pipe coupling NORMACONNECT® COMBI GRIP/COMBI GRIP E axial restraint pipe couplings are used to connect plastic pipes with metal pipes. For the plastic pipe the coupling features on one side a special anchoring ring with rows of flat teeth which are pressed into the pipe surface without damaging the material. At the same time the force applied is distributed evenly across the pipe surface. For the metal pipe the coupling features on the other side an anchoring ring with conically stamped teeth which grip into the pipe surface. Due to the special design of the anchoring ring the coupling can withstand even high vibration loads. Advantages at a glance • Corrosion resistant • No welding • No special tools necessary • Installation and working in every kind of weather (hot and cold) • Reusable Information • Sizes: from 38/40.0 mm to 406.0/406.0 mm • Working pressure: 16.0 - 6.0 bar • Material: AISI 304, AISI 316 Ti • EPDM: Sizes from 26.9 mm up to 168.3 mm: - 30 °C up to + 125 °C Sizes > 180.0 mm: - 20 °C up to + 80 °C • NBR: from - 20 °C up to + 80 °C Technical data & Ordering information

Open the catalog to page 1

Infrastructure Connectors - FGRTechnical data & Ordering informationNORMACONNECT® FGR COMBI GRIP 0 (O.D.) PN1 (Nominal Pressure) is the max. admissible working pressure in shipbuilding, based on a safety factor of > 4. WP2 is the max. working pressure in industrial applications, with a safety factor as per NORMA specification.

Open the catalog to page 2

FGR COMBI GRIP– Versions NORMACONNECT® COMBI GRIP E axial restraint pipe couplings are used to connect plastic pipes with metal pipes. Advantages at a glance • Hollow trunnion version for smaller diameters Hex socket locking bolts housing wall thickn. 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.2 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 1.5 mm 2.5 mm 2.5 mm 2.5 mm 2.5 mm PN¹ (Nominal Pressure) is the max. admissible working pressure in shipbuilding, based on a safety factor of ≥ 4. WP² is the max. working pressure in industrial applications, with a safety factor as per...

Open the catalog to page 3