Datasheet FA13
14Pages

{{requestButtons}}

Catalog excerpts

Datasheet FA13 - 1

Non-contacting two-channel speed sensor type FA13 with stainless steel screw-in thread NOR/S Scanning type Application range Series FA13 speed sensors are mainly used in the following areas: Shipbuilding industry and machinery and equipment. They usually measure the speed of ferromagnetic toothed wheels. Furthermore, they can be used to measure any movement of ferromagnetic parts, e. g.: • Toothed wheels with different tooth forms • Bolt heads • Holes, openings or grooves • Impulse bands on plain shafts (accessories) Specific features • High quality and robust stainless steel housing: IP66/68/69 • Excellent vibration and shock resistance • High degree of EMC immunity for difficult electrical environment • Variable lengths, threads and electrical connections • Detection of very low speed (near zero speed) • Due to its design and its approvals especially suitable for shipbuilding industry Measuring principles Speed sensors of the FA[..]11 series operate according to different measuring principles, depending on the sensor type: Difference-hall-effect principle (type FAH11) Two closely spaced Hall elements are located on the sensor chip. The field of a magnet generates a constant voltage in the Hall elements. Ferromagnetic objects with an interrupted surface as they pass the Hall elements cause the Hall voltage to change. When the moving object covers only one Hall element, a differential voltage is generated to provide a measuring signal. The frequency of this measuring signal is proportional to the speed of movement (rotational speed). The difference-Hall principle is direction sensitive. Inductive-magnetic principle (type FAJ11]) The measuring element consists of a sensing coil and an iron core with an attached permanent magnet. Ferromagnetic objects with an interrupted surface as they pass cause the constant field of the magnet to be changed and induce a voltage in the sensing coil. The frequency of this signal is proportional to the speed of movement (rotational speed). The inductive-magnetic principle is direction independent. Datasheet DB-FA13-EN | V01.02 | 29/05/2017 | Valid from product revision A | www.noris-group.com | sales@noris-group.com

Open the catalog to page 1
Datasheet FA13 - 2

| Overview speed sensors FA13 series NORIS Automation GmbH Measuring princi- Signal outputs ple Signal form One square wave signal One square wave signal Two square wave signals, Q2 to Q1 is 90° phase shifted Two square wave signals, Q2 to Q1 is 90° phase shifted, one rotation direction signal Two square wave signals, galvanically isolated, Q2 to Q1 is 90° phase shifted Two + two inverted square wave signals, Q1 to Q2 and Q1_N to Q2_N are 90° phase shift DB-FA13-EN NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 |...

Open the catalog to page 2
Datasheet FA13 - 3

NORIS Automation GmbH Dimensions, connections and drawings | Dimensions, connections and drawings Dimensions and mounting drawing Explanation to the illustration Please note the possible combinations of L1 and L2 for the nominal length in the type code. L1: 60, 80, 100, 120 mm (up to 200 mm available on request) L2: 5, 20, 40 mm G1: M14x1; M16x1.5; M18x1; M18x1.5; 5/8“ – 18 UNF (see type code) Direction-sensitive mounting of sensors with difference-hall principle (FAH[..] series) B ±15° Explanation to the illustration The left figure refers to the “tooth wheel” as scan object. Note that the...

Open the catalog to page 3
Datasheet FA13 - 4

| Dimensions, connections and drawings NORIS Automation GmbH Connectors and pin assignment The following table shows an overview about the speed sensors and the available connector types. Explanation to the left illustration A: Length 30 mm B: Length 18 mm 1: +UB 2: -Ub (0V) 3: Signal Q PE: Shield Note: On delivery supplied with female connector. A: 0 29 mm B: Length 26 mm 1: Shield 2: -Ub (0V) 3: Signal Q 4: Signal Q 5: +Ub 6: Coding nib Note: On delivery without any female connector (accessories set ZL4-1A) Explanation to the left illustration A: 0 18 mm B: Length 16 mm 1: +Ub 2: not used...

Open the catalog to page 4
Datasheet FA13 - 5

NORIS Automation GmbH Dimensions, connections and drawings | Explanation to the left illustration A: 0 29 mm B: Length 26 mm 1: +Ub 2: -Ub (0V) 3: Signal Q 4: Shield 5: Coding nib Note: On delivery without any female connector List with available female connectors Explanation to the left illustration A) 3 x 0.33 mm2 halogen-free C) Length K1 ± 5 % (K1 see customer drawing) DB-FA13-EN NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 5
Datasheet FA13 - 6

| Dimensions, connections and drawings NORIS Automation GmbH Explanation to the left illustration A) Wires 4 x 0.33 mm2 halogen-free C) Length K1 ± 5% (K1 see customer drawing) C) Length K1 ± 5% (K1 see customer drawing) Connection assignment for type FAH, FAJ (one channel) DB-FA13-EN NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 6
Datasheet FA13 - 7

NORIS Automation GmbH Dimensions, connections and drawings | Connection assignment for type FA[..]S DB-FA13-EN NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 7
Datasheet FA13 - 8

| Dimensions, connections and drawings NORIS Automation GmbH Elementary circuit diagrams Elementary circuit diagram FAHS13 Elementary circuit diagram FAH13, FAJ13, FAHZ13 Elementary circuit diagram FAHD13 Elementary circuit diagram FAHQ13 DB-FA13-EN NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 8
Datasheet FA13 - 9

NORIS Automation GmbH General technical data | DB-FA13-EN NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 9

All NORIS Group GmbH catalogs and technical brochures

  1. Flyer N3500

    3 Pages

  2. Datasheet FA11

    14 Pages

  3. Datasheet NIQ3

    20 Pages

  4. Datasheet

    2 Pages

  5. NORIS Brochure

    15 Pages

  6. RW5

    2 Pages

Archived catalogs