Datasheet DWA
4Pages

{{requestButtons}}

Catalog excerpts

Datasheet DWA - 1

Rotary position sensor with ohmic signal output NOR/S Measuring principle Rotary position sensor DWA Scope of application The type DWA rotary position sensors are robust, maintenance-free sensors that are particularly used in the Shipbuilding industry and machinery and plant engineering industry to convert the mechanical rotation angle of a shaft into an electrical signal (e.g. for measuring the rudder angle or adjusting the pitch). Measuring principle The instrument shaft is connected to a double sensor. Depending on requirements, the angle position that can be acquired electronically (10° ... 320° in 10° steps (linear acquisition angle)) must be selected and adjusted within a mechanical revolution (using a round bracket for mechanically adjusting a freely selectable reference position). The version with ohmic resistor connection provides a passive electrical signal. Special features • 360° rotation angle without mechanical limitation • Reference positions easy to adjust mechanically • Maintenance-free operation • No reference run necessary • Potential-separated channels Datasheet DB-DWA-EN | V01.04 | 27/06/2017 | Valid from product revision C | www.noris-group.com | sales@noris-group.com

Open the catalog to page 1
Datasheet DWA - 2

| Dimensioned drawing, connection and wiring diagrams NORIS Group GmbH Dimensioned drawing, connection and wiring diagrams Design DWA…-1: for terminals up to max. 4 mm2 A Design DWA…-2: with fixed connection cable A: Length 115 mm B: Length 40 mm C: Length 25 mm D: Ø 40h8 mm E: Ø 12h9 mm F: Ø 80 mm G: Length 26 mm Wiring diagram 11: R10 12: R1M 13: R11 21: R20 22: R2M 23: R21 Information on the connection diagram: Tap-off point on the voltage divider in the arrow direction when the drive shaft is rotating clockwise (looking at the shaft) Wiring diagram A: Length 73 mm B: Length 30 mm C:...

Open the catalog to page 2
Datasheet DWA - 3

NORIS Group GmbH Technical data | DB-DWA NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 3
Datasheet DWA - 4

| Type code NORIS Group GmbH Type code structure Special types If our standard types do not correspond with your expectations, we are pleased to develop a special solution together with you. DB-DWA NORIS Automation GmbH | Muggenhofer Str. 95 | 90429 Nuremberg | Germany | Tel: +49 911 3201-220 | Fax: +49 911 3201-150 | sales@noris-group.com | www.noris-group.com Errors and omissions excepted

Open the catalog to page 4

All NORIS Group GmbH catalogs and technical brochures

  1. Flyer N3500

    3 Pages

  2. Datasheet FA11

    14 Pages

  3. Datasheet FA13

    14 Pages

  4. Datasheet NIQ3

    20 Pages

  5. Datasheet

    2 Pages

  6. NORIS Brochure

    15 Pages

  7. RW5

    2 Pages

Archived catalogs