RA/802080/M/80
35Pages

ISOLine™ 15552 cylinder, double acting > 0 32 ... 320 mm > High performance adaptive cushioning system "ACS" > Low temperature version up to -40 °C > High temperature version up to +150 °C > 16 bar version available > Rail Cylinder Shock and vibration tested to EN 61373 Category 1; Class A + B Technical features Medium: Compressed air, filtered, lubricated or non-lubricated Standard: ISO 15552 Operation: Double acting, adjustable cushioning Operating pressure: 0 32 ... 125 mm (Profile barrel) 1 ... 12 bar (14 ... 174 psi) 0 32 ... 200 mm (Round barrel) 1 ... 16 bar (14 ... 232 psi) 0 250 & 320 mm (Round barrel) 1 ... 10 bar (14 ... 145 psi) Operating temperature: 0 32 ... 125 mm "Standard version" -20 ... +80 °C (-4 ... +176 °F) 0 160 ... 320 mm "Standard version" -10 ... +80 °C (+14 ... +176 °F) 0 32 ... 320 mm "High temperature version" (T) 0 ... +150 °C (-17,7 ... +302 °F) 0 32 ... 200 mm "Low temperature version" (L) -40 max. ... +80 °C (-40 ... +176 °F) Air supply must be dry enough to avoid ice formation at temperatures below +2 °C (+35 °F) Standard Materials: Barrel: Anodised aluminium End covers: Pressure diecast aluminium (0 200 ... 320 mm gravity cast aluminium) Piston rod: Stainless steel (martensitic) Piston rod seals: PUR (0 160 ... 320 mm NBR) Piston seals: PUR (0 160 ... 320 mm NBR) 'O'-rings: NBR Technical data Profile barrel • • • • • • • Round barrel • • ••••••••• Cushioning Adaptive cushioning systems "ACS" • • • • • • • Cushioning (adjustable cushion) • • • • Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159l) © 2020 Norgren GmbH

The new “ACS” Adaptive Cushioning System provides a high performance pneumatic damping function. The system will automatically cushion for a wide range of general applications as delivered. Manual adjustment is still possible for extreme applications. Operating area of the “ACS” Adaptive Cushioning System Adjustment in this zone not necessary. Mass Mass [kg] (kg) Only adjust the cushion needle in extreme applications. Design and sizing in pneumatics Golden Rules Design and sizing in pneumatics is often based upon experience coupled with an element of fear of under specifying crucial...

Discription Datasheet Smooth Line Cylinder 1_5_235_PRA_822000_M_EX Clean Line 1_5_240_PRA_842000_M IVAC Industrial Cylinder IVAC Clean Line Cylinder 1_9_067_PSA_802000_F1 Cylinder with position sensor 1_9_068_PSA_802000_F1_EX Datasheet (standard) Cylinder with position sensor 1_9_062_SA_8000_F1_EX Single Acting - Single Acting Cylinder - • Range available. For additional information please contact the technical service or http://www.norgren.com *1) Rail Cylinder Shock and vibaration tested to EN 61373 Category 1; Class A + B Our policy is one of continued research and development. We...

Cylinder variants Symbol Please see the description below Cylinder with Double Ended Piston Rod Cylinder with Double Ended Piston Rod without Magnet Cylinder with Double Ended Piston Rod and Special Wiper - Seal with Magnet (suitable for appl. with cement, plaster (stucco), arizona sand, hoar-frost or ice) Cylinder with Double Ended Piston Rod and Special Wiper - Seal without Magnet Four Position Cylinder Maximum stroke = stroke 1 + stroke 2 0 32 mm = 700 mm, 0 40 mm = 1000 mm, 0 50 mm = 1000 mm, 0 63 mm = 900 mm, 0 80 mm = 1200 mm, 0 100 mm = 1100 mm, 0 125 mm = 1200 mm, 0 160 mm = 1200...

Option selector Non-standard variants Standard Hydraulic version 0 32 ... 100 mm only Low temperature version -40 °C (-40 °F) (0 32 ... 125 mm) -30 °C (-22 °F) (0 160 ... 320 mm) High temperature version +150 °C max. (+302 °F) Standard Round barrel Profile barrel Piston rod material Stainless steel martensitic Stainless steel austenitic Hard chromium plated Stainless steel austenitic & hard chromium plated Cushioning Substitute ■<None H L T Substitute ^ None P Substitute ^ R S C D Substitute •<- Variants 0 32 ... 320 mm (magnetic piston) Standard Special wiper/seal Low friction Piston rod...

Cylinder with Profile barrel ø 32 ... 125 mm Cylinder with Round barrel ø 32 ... 320 mm Mountings Model Clear anodised aluminium Die-cast aluminium (ø 32 ... 100 mm) Coated cast iron (ø 125 ... 200 mm Die-cast aluminium (ø 32 ... 100 mm) Coated cast iron (ø 125 ... 200 mm) Inner ring: steel, Outer ring: brass Die-cast aluminium (ø 32 ... 125 mm) Coated cast iron (ø 160 ... 320 mm) Bolt: galvanized steel (martensitic) Circlip: galvanized steel Die-cast aluminium (ø 32 ... 100 mm) Coated cast iron (ø 125 ... 320 mm) Galvanized steel, Bolt: galvanized steel, Circlip: Galvanized steel Coated...

*) Insert standard stroke length: 50, 100, 160, 200, 250, 320, 400 and 500 mm, use the next bigger standard stroke. Model Model Port Banjo flow Straight fitting Elbow fitting Profile barrel Round barrel size control For alternative fitting types please contact the technical service. Groove cover Qo Switch mounting brackets for M/50 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159l) © 2020 Norgren GmbH

©NORGREN __e ® Spares kit for profile and round barrel (wearing parts to be replaced are: piston seals, barrel seals, damping seals and piston rod seals as well as the wear ring) *** = add cylinder diamteren 1.5.220.08 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document. (2016 - 9159l) © 2020 Norgren GmbH