Tube connectors Tube clamps Tube joints Tubes Columns

Technical information Thermoplastic tube clamping system The tube clamping system is characterised by the attractive design and a special reducing sleeve concept. Closed system (one-piece, slitted) This unique concept and the associated clamping of different diameters and tube forms permit a flexibility never before achieved. Round tube Reducer sleeve for tube Ø12–25 By simply exchanging a sleeve an existing tubular construction can be transformed into one with a different diameter or cross-section. Benefits: - Only one clamping element per construction type. - Tube reduction (from Ø30–12 or...

29000 Tube clamps cross, plastic S Version: Black. Screws and nuts electro zinc-plated. On request: Plastic levers for locking. Accessories: - Reducer sleeves 29042 - Round and square tubes 29050 Note: The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves 29042 if smaller tubes are to be clamped or a conversion from round to square tubes is required. Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. 29000 Tube clamps cross, aluminium Material: Cast aluminium. Screws and nuts steel. Sample order: nlm 29000-523030 On request: Levers for locking and other diameters....

29000 Tube clamps cross, aluminium S Material: Cast aluminium. DIN 7984 screws and DIN 985 nuts, steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. On request: Clamping levers for tightening. Accessories: - Round and square tubes 29050 T

cross, stainless steel Material: Investment cast 1.4308 stainless steel. ISO 4762 cap screw and ISO 4032 hex nut, stainless steel. From ø30 mm ISO 4017 hex head bolt, stainless steel. Version: Electropolished. Sample order: nlm 29000-11212 T Note: The tube clamps with diameters 30 and 40 mm have a silicone sleeve that protects the thread of the hex head screw from contamination and damage. On request: Clamping levers for tightening. Accessories: - Round and square tubes 29050

29002 Tube clamps cross, plastic 49 Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Version: Black. Screws and nuts electro zinc-plated. Note: These cross clamps are for 30 mm square tubes. Use reducer sleeves 29040 if smaller tubes are to be clamped or a conversion from square to round tubes is required. On request: Plastic levers for locking. Accessories: - Reducer sleeves 29040 - Round and square tubes 29050 29002 Tube clamps cross, aluminium Material: Cast aluminium. Screws and nuts steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. Sample order: nlm 29002-523030...

29004 Tube clamps cross, plastic Version: Black. Screws and nuts electro zinc-plated. Note: These cross clamps are for 30 mm square and round tubes. Use reducer sleeves 209040 or 29042 if smaller tubes are to be clamped or a conversion from round to square tubes is required. Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. On request: Plastic levers for locking. Order No. Accessories: - Reducer sleeves 29040 and 29042 - Round and square tubes 29050 29004 Tube clamps cross, aluminium B On request: Clamping levers for fastening and other diameters. Accessories: - Round and square...

29006 Tube clamps T-angle, plastic Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Version: Black. Screws and nuts electro zinc-plated. Sample order: nlm 29006-1818 Note: The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves 29042 if smaller tubes are to be clamped or a conversion from round to square tubes is required. On request: Plastic levers for locking. Accessories: - Reducer sleeves 29042 - Round and square tubes 29050

29006 Tube clamps T-angle, aluminium Material: Cast aluminium. DIN 7984 screws and DIN 985 nuts, steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. On request: Levers for locking and other diameters. Accessories: - Round and square tubes 29050

29006 Tube clamps T-angle, stainless steel A Material: Investment cast 1.4308 stainless steel. ISO 4762 cap screw and ISO 4032 hex nut, stainless steel. From ø30 mm ISO 4017 hex head bolt, stainless steel. Version: Electropolished. Sample order: nlm 29006-11212 Accessories: - Round and square tubes 29050 On request: Clamping levers for tightening. Note: The tube clamps with diameters 30 and 40 mm have a silicone sleeve that protects the thread of the hex head screw from contamination and damage.

29008 Tube clamps T-angle, plastic Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Version: Black. Screws and nuts electro zinc-plated. On request: Plastic levers for locking. Note: These T-clamps are for 30 mm square tubes. Use reducer sleeves 29040 if smaller tubes are to be clamped or a conversion from square to round tubes is required. Accessories: - Reducer sleeves 29040 - Round and square tubes 29050

29008 Tube clamps T-angle, aluminium L Material: Cast aluminium. Screws and nuts steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. On request: Levers for locking and other sizes for square tube. Accessories: - Round and square tubes 29050 29008 Tube clamps right-angle, aluminium H Material: Cast aluminium. Screws and nuts steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. On request: Levers for locking and other diameters. Accessories: - Round and square tubes 29050 A

29010 Tube clamps base, plastic 21000 Version: Black. Screws and nuts electro zinc-plated. Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Note: The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves 29042 if smaller tubes are to be clamped or a conversion from round to square tubes is required. On request: Plastic levers for locking. Accessories: - Reducer sleeves 29042 - Round and square tubes 29050

29010 Tube clamps base, aluminium E S Material: Cast aluminium. DIN 7984 screws and DIN 985 nuts, steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. Sample order: nlm 29010-518 On request: Levers for locking and other diameters. Accessories: - Round and square tubes 29050