Catalogs >
norelem - Éléments standard mécaniques >
Standard component system - mounting and drilling elements

Standard component system - mounting and drilling elements
12Pages

Catalog excerpts

Standard component system - mounting and drilling elements - 1

Jig elements Drill bushes

Standard component system - mounting and drilling elements - 2

08050 Hinge blocks long 45° Material: 1.0036 Version: Black oxidised. L 08100 Hinge blocks short L1-0,03 Version: Phosphated

Open the catalog to page 2

Standard component system - mounting and drilling elements - 3

Material: Body 1.0036, snapper 1.0503 Version: Body phosphated, snapper black oxidised. Note: Missing dimensions for snapper see 07560.

Open the catalog to page 3

Standard component system - mounting and drilling elements - 4

Material: Steel. H +0,05 to match ﬁnal assembly Version: Carbonitrided and tempered, black oxidised. Bottom face ground. Sample order: nlm 08180-01 Version: Hardened and ground. Top face without centerbore. Material: Tool steel.

Open the catalog to page 4

Standard component system - mounting and drilling elements - 5

08570 Drilling plates DIN 6348 enhanced A1 Version: Black oxidised. 08570-13 bright.

Open the catalog to page 5

Standard component system - mounting and drilling elements - 6

Material: Steel. Version: Black oxidised. Sample order: nlm 08580-05 Drawing reference: 1) these two holes only with size 6

Open the catalog to page 6

Standard component system - mounting and drilling elements - 7

Material: Hardened steel 1.7139 Version: Hardened, black oxidised. Sample order: nlm 08600-01 (in pairs) Note: Supplied in pairs. Material: Hardened steel 1.7139 Sample order: nlm 08610-03 (in pairs) Version: Hardened, black oxidised.

Open the catalog to page 7

Standard component system - mounting and drilling elements - 8

08900 Drill bushes cylindrical DIN 179 A Sample order: nlm 08900-A0120X06 (bush Form A D1 = 1.2 mm and L1 = 6 mm) Material: Special low carbon steel Version: Hardened to 740 ±80 HV 10 and ground. Note: From diameter D1 over 15 mm size increases are 0.5 mm. Drawing reference: Form A: hole rounded one end Form B: hole rounded both ends 1) Chamfer for insert Product type

Open the catalog to page 8

Standard component system - mounting and drilling elements - 9

08910 Drill bushes flanged DIN 172 B D3 Sample order: nlm 08910-A0120X09 (bush Form A D1 = 1.2 mm and L1 = 9 mm) Version: Hardened to 740 ±80 HV 10 and ground. Material: Special low carbon steel Note: From diameter D1 over 15 mm size increases are 0.5 mm. Drawing reference: Form A: hole rounded one end Form B: hole rounded both ends Product type

Open the catalog to page 9

Standard component system - mounting and drilling elements - 10

08920 Drill bushes push-in DIN 173 A Version: Hardened to 780 ±40 HV 10 and ground. Without lead-in groove. Material: Special steel Sample order: nlm 08920-A1000X15 (bush Form A with D1 = 10 mm and D2 = 15 mm) Note: All bushes have the bore size marked on the upper face, e.g. 10. Diameters D1 over 15 mm increase in size by 0.5 mm. Supplied with matching retaining pin. E1 centre spacing to shoulder screws

Open the catalog to page 10

Standard component system - mounting and drilling elements - 11

08920 Drill bushes push-in DIN 173-1 02000 Form L exchangeable bush Form K quick-change bush for right-hand cutting tools Note: All bushes have the bore size marked on the upper face, e.g. 15 F7. Form K are quick-change bushes. Dowels or coiled spring pins together with DIN 173-1 flathead screws can be used in place of the stop pin. Sample order: nlm 08920-K0400X16 (bush Form K D1 = 4 mm and L1 = 16 mm) dimensions same as Form K Version: Hardened to 780 ±40 HV 10 and ground. E2 = Hole spacing when using dowels or coiled spring pins. Diameter D1 over 15 mm increase in size by 0.5 mm. The...

Open the catalog to page 11

Standard component system - mounting and drilling elements - 12

08926 Drill bush clamps DIN 173-1 Material: Bush clamp 1.0711. Cap screw steel. Version: Clamping bush, black oxidised. Cap screw, electro zinc-plated. Sample order: nlm 08926-061X10 (clamping bush D12= 6.1 mm and L13 = 10 mm) Note: DIN 912 cap screws are supplied. The clamping bush 08926-081X12 is left bright. Socket head screw DIN 912 08927 Shoulder screws flathead for DIN 173 drill bushes D9 Material: Steel. Version: Bright, grade 10.9 Sample order: nlm 08927-06X04 (DIN 173-1 screw D7 = M6 and L9 = 4 mm) Order No. Product type

Open the catalog to page 12