Standard component system -Fixing parts
184Pages

{{requestButtons}}

Catalog excerpts

Standard component system -Fixing parts - 1

07000 Fasteners Ball-end thrust screws Thrust screws and thrust pads Grippers Torque bolts Threaded inserts Lifting bolts Swivel bales Ring bolts

Open the catalog to page 1
Standard component system -Fixing parts - 3

Studs Material: Carbon steel 1.1181. Version: Tempered to 8.8 and black oxidised. Sample order: nlm 07020-308 VNote: Permissible loading see Technical Information. Thread end with oval point is permissible. On request: Stainless steel.

Open the catalog to page 3
Standard component system -Fixing parts - 4

Material: Carbon steel. Version: Thread rolled. M6-M12 tempered to 10.9, black. M14-M36 tempered to 8.8, black. Sample order: nlm 07030-12125 VNote: Permissible load: see Technical Information.

Open the catalog to page 4
Standard component system -Fixing parts - 6

Material: Carbon steel. Version: Forged and milled, rolled thread. M6-M12 tempered to 10.9, black. M14-M36 tempered to 8.8, black. Sample order: nlm 07040-1263 VNote: Permissible load: see Technical Information.

Open the catalog to page 6
Standard component system -Fixing parts - 8

Material: Carbon steel. Version: Forged and milled, rolled thread, tempered to 12.9, black. Sample order: nlm 07040-112125 Note: Permissible load: see Technical Information. V

Open the catalog to page 8
Standard component system -Fixing parts - 9

Nuts for T-slots DIN 508 enhanced Material: Carbon steel grade 10, EN AW-7075 or stainless steel 1.4305. Version: Steel black. Aluminium and stainless steel bright. Sample order: nlm 07060-20 Note: Nuts for T-slots in aluminium have threaded steel inserts. Order No. Order No. Order No. Slot D A E H K high carbon steel aluminium stainless steel width

Open the catalog to page 9
Standard component system -Fixing parts - 10

Material: Carbon steel. Version: Tempered to 10. Sample order: nlm 07061-12 Order No. Nominal D A E L H K Material: High carbon steel or stainless steel 1.4305. Sample order: nlm 07070-16 Note: These blank nuts are used to make nuts for T-slots with all sorts of thread sizes cost-effectively. Order No. Order No. Slot A E H K high carbon steel stainless steel width

Open the catalog to page 10
Standard component system -Fixing parts - 11

07071Slot nuts twist-in Type I Material: Steel. Version: Electro zinc-plated. Sample order: nlm 07071-0604 Note: The slot nut is twisted into the profile slot and so can be subsequently inserted into existing systems. The spring-loaded ball allows the nut to be fixated anywhere in the profile slot. Order No. Type Slot Form D B H H1 L

Open the catalog to page 11
Standard component system -Fixing parts - 12

Slot nutstwist-in, keyed Type I Material: Steel. Version: Electro zinc-plated. Sample order: nlm 07073-0604 Note: The slot nut is twisted into the profile slot and so can be subsequently inserted into existing systems. The spring-loaded ball allows the nut to be fixated anywhere in the profile slot. The key centres the nut in the profile slot and keeps it neatly seated. Order No. Type Slot Form D N B H H1 H2 L

Open the catalog to page 12
Standard component system -Fixing parts - 13

Slot nuts strong Type I Steel. Version: Electro zinc-plated. Sample order: nlm 07075-0804 Note: Suitable for high load connections. Since the key passes to the slot form of the profile, forces are transferred to the profile. The total height allows more threads to be engaged. The slot key can only be inserted into the profile slot from the end. The spring-loaded ball allows the slot key to be fixated anywhere in the profile slot. Order No. Type Slot D 07076 Slot key profile type I Material: Steel. Version: Coated. Sample order: nlm 07076-084008x2000 Note: The slot profiles has a tapped hole...

Open the catalog to page 13
Standard component system -Fixing parts - 14

Slot nuts Material: Steel. Version: Electro zinc-plated. Sample order: nlm 07077-1004 Note: The slot nut is twisted into the profile slot and so can be subsequently inserted into existing systems. Slot nuts Order No. Type Slot B D H H2 L N twist-in with spring Type B Steel. Version: Electro zinc-plated. Sample order: nlm 07078-1004 Note: The slot nut is twisted into the profile slot and so can be subsequently inserted into existing systems. The spring allows the nut to be fixated anywhere in the profile slot. Order No. Type Slot B D H H1 H2 L N R

Open the catalog to page 14
Standard component system -Fixing parts - 15

Nuts for T-slotsrhombic form Material: Carbon steel. Version: Tempered to 8 and black oxidised. Sample order: nlm 07080-114 Note: The benefit of rhombic nuts for T-slots is that they can be fitted in the slot from the top. They are particularly useful for long T-slots, or when the configuration on the machine table does not permit clamping screws or nuts for T-slots to be inserted from the side. Application: Insert from above then twist in the slot until it stops.

Open the catalog to page 15
Standard component system -Fixing parts - 16

Material: Steel. Version: Electro zinc-plated. Sample order: nlm 07090-0804015 Note: Universal fastening element. The T-nut is twisted into the profile slot and so can be subsequently inserted into existing systems. The serrations break through the anodised film and creates a secure, electrical conductive connection. Order No. Type Slot D N B H H1 L1

Open the catalog to page 16
Standard component system -Fixing parts - 17

Hammer-head screws Material: Steel. Version: Electro zinc-plated. Sample order: nlm 07094-0806015X16 Note: Universal fastening element. The hammer-headed screw is twisted into the profile slot and so can mounted into an existing systems at a later date. The serrations break through the anodised film and creates a secure, electrical conductive connection. Order No. Type Slot B D H L L1 N

Open the catalog to page 17
Standard component system -Fixing parts - 18

Material: Screw carbon steel. Ball ball-bearing steel. Version: Screw grade min. 10.9, black. Ball hardened, bright. Sample order: nlm 07100-10820 Note: Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not flat and parallel can be firmly clamped or supported with Form B with flattened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: full ball Form B: flattened ball Form BV: flattened ball, rotation lock Form F: serrated flattened ball Form FV: serrated flattened ball, rotation lock Order No. D1 D2 L1 L3 L4 Ball...

Open the catalog to page 18
Standard component system -Fixing parts - 19

Order No. Order No. D1 D2 D3 L2 L3 L4 Ball 0 SW Load rating Order No. Order No. D1 D2 D3 L2 L3 L4 Ball 0 SW Load rating

Open the catalog to page 19
Standard component system -Fixing parts - 20

Ball-end thrust screws with headstainless steel Material: Stainless steel Version: Bright. Sample order: nlm 07101-11230 Note: Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not flat and parallel can be firmly clamped or supported with Form B with flattened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: with full ball Form B: with flattened ball

Open the catalog to page 20
Standard component system -Fixing parts - 21

Ball-end thrust screws without head with full ball, LONG-LOK secured Material: Screw carbon steel, grade 10.9 Ball, ball-bearing steel or POM. LONG-LOK thread lock nylon. Version: Screw black. Ball hardened, bright. Note: Ball-end thrust screws with full ball are used when a clean, polished contact surface is required. Drawing reference: Form A: steel ball Form D: POM ball L4 = approx. 2x pitch Order No. Order No. D1 L1 L3 Ball 0 SW Load rating

Open the catalog to page 21

All Norelem - Éléments standard mécaniques catalogs and technical brochures

  1. technoshop

    24 Pages

  2. IGO

    12 Pages

  3. UNILOCK

    26 Pages

Archived catalogs

  1. BGB

    1456 Pages