Standard component system - Basic elements - 29 Pages

Add to MyDirectIndustry favorites
Standard component system - Basic elements

Catalog excerpts

Basic elements Subplates Discs Profiles Angle plates Tombstones

 Open the catalog to page 1

norelem positions Flexible standard component system 01270 Page 93 Tombstones double-sided grey cast iron V-block machined all sides extra wide, grey cast iron Circular plates steel Basic elements Subplates Discs Profiles Angle plates Tombstones U-profiles machined all sides grey cast iron or aluminium Base plate with T-slots grey cast iron Block machined all sides grey cast iron or aluminium Circular plates grey cast iron or aluminium Square hollow profiles grey cast iron Base plates steel Base plate with flanges grey cast iron L-profiles grey cast iron or aluminium Rectangular hollow...

 Open the catalog to page 2

Material: GJL 250 annealed. Sample order: nlm 01040-04

 Open the catalog to page 3

Material: Carbon steel 1.1181. Version: Bright. Sample order: nlm 01060-01 Drawing reference: machined surfaces: ±0.25 mm thickness: +0/-0.5 mm raw surfaces: ±2 mm Example of a fixture using almost exclusively norelem parts: 23000    22000    21000    20000    10000    09000    08000    07000    06000    05000    04000    03000    02000    01000

 Open the catalog to page 4

Material: Grey cast iron GJL 250 Version: Mounting surfaces ground Sample order: nlm 01127-005060 Note: The base plates are positioned using shoulder screws 07533-12055, which are placed in the fastening holes. The through holes for DIN 912 cylinder screws are used for additional fastening. precision steel Material: Steel 1.1730 Version: Bright. Sample order: nlm 01130-04X500 (include length L) Note: These precision steel plates are suitable for use as base plates in machine, tool and fixture construction. The dimension L is sawn to length and is always supplied oversized.

 Open the catalog to page 5

Platesgrey cast iron or aluminium Material: GJL 250 annealed or EN AW-7075 Sample order: nlm 01140-07X300 (include length L) Note: The length L is cut by saw and is always supplied overlong. Drawing reference: machined faces: grey cast iron: +0.2 mm / +0.5 mm aluminium: ± 0.1 mm length tolerance: <200 mm: +1/+5 >200 mm <400 mm: +4/+15 >400 mm: +13/+40 (W) Order No.    Order No.    L = length    B    S grey cast iron    aluminium

 Open the catalog to page 6

Material: Grey cast iron GJL 250 Version: Mounting surfaces ground Sample order: nlm 01148-005050 Note: The subplate positioning and fastening holes conform to subplates for machine tools acc. to DIN 55201 and JIS 6337-1980.

 Open the catalog to page 7

hole for socket screw DIN 912, M12 hole for socket screw DIN 912, M16 hole for socket screw DIN 912, M16 hole for socket screw DIN 912

 Open the catalog to page 8

Sample order: nlm 01150-002 Note: The plates are also available with slots. Type A: ground contact faces (Ra 0.8). Type B: ground contact faces (Ra 0.8) and sides (Ra 1.6). Type C: milled contact faces and sides (Ra 3.2). Order No.    Order No.    Order No.    L    S    A Type A    Type B    Type C

 Open the catalog to page 9

Block machined all sides grey cast iron or aluminium 0,02/100 Material: GJL 250 annealed or EN AW-7075 Sample order: nlm 01160-05X300 (include length L) Note: The length L is cut by saw and is always supplied overlong. Drawing reference: machined surfaces: ±0.25 mm tolerances of lengths: <200 mm: +1/+5 from 201 mm to 400 mm: +4/+15 > 400 mm: +13/+40 Order No.    Order No.    L = length    B    H grey cast iron    aluminium 01180 Base plate with flangesgrey cast iron Material: GJL 250 annealed. Sample order: nlm 01180-03

 Open the catalog to page 10

Material: GJL 250 annealed. Sample order: nlm 01250-3203701 On request: Other slot widths. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm without slot    with T-slot

 Open the catalog to page 11

Angle plates aluminium Material: Aluminium (Rm 330 N/mm2, 110 HB). Sample order: nlm 01252-260250 Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm Cost-effective designing and machining with norelem: norelem basic element: T-profile    Finished product 23000    22000    21000    20000    10000    09000    08000    07000    06000    05000    04000    03000    02000    01000

 Open the catalog to page 12

Tombstones single-sided Material: GJL 300 Version: Reference surfaces precision machined. The clamping surface has 1 mm allowance. Sample order: nlm 01263-006376 Note: The single-sided tombstones are matched to subplates for machine tools acc. to DIN 55201 and JIS 6337-1980. Ring bolts for lifting are supplied.

 Open the catalog to page 13

hole for socket screw DIN 912, M16 hole for socket screw DIN 912, M12 hole for socket screw DIN 912, M12 hole for socket screw DIN 912, M16 Tombstones single-sided hole for socket screw DIN 912, M16 hole for socket screw DIN 912, M16

 Open the catalog to page 14

Material: GJL 300 Version: Reference surfaces precision machined. The clamping surfaces have 0.5 mm allowance. Sample order: nlm 01265-005020 Note: The double-sided tombstones are matched to subplates for machine tools acc. to DIN 55201 and JIS 6337-1980. Ring bolts for lifting are supplied. A cover prevents the cavity of the tombstone filling up with swarf.

 Open the catalog to page 15

All Norelem - Éléments standard mécaniques catalogs and technical brochures

  1. technoshop

    17 Pages

  2. IGO

    12 Pages

  3. UNILOCK

    26 Pages

Archived catalogs

  1. BGB

    1456 Pages