Catalogs >
norelem - Éléments standard mécaniques >
Service Instructions Guide Rails norelem

Service Instructions Guide Rails norelem
12Pages

Catalog excerpts

GUIDE RAILS

2. Overview of the norelem range 3. Safety regulations and security notice 4. Using the guide rails 4.2 Using and connecting accessories 5.1 Lubrication 5.2 Adjusting the slide guide

Open the catalog to page 2

Service Instructions Guide Rails norelem - 3

A wide range of guide rails for high-precision movement norelem guide rails have many uses. Whether for metrology equipment construction, or in the optical industry, or for maintenance, milling or even the creation of special machinery, norelem guide rails provide you with a versatile, qualitative and high-precision solution that can be adapted to all your needs. 2. Overview of the norelem range 21010 Guide rail with dovetail mount with micrometric adjustment screw 21060 Guide rail with dovetail mount 21061 Guide rail with dovetail mount with end plates 21062 Guide rail with dovetail mount...

Open the catalog to page 3

Service Instructions Guide Rails norelem - 4

3. Safety regulations and security notice Attention - please pay attention to the following points: ■ Avoid impact to maintain micrometric accuracy ■ Always comply with the applicable accident prevention guidelines and general technical rules when handling, cleaning and using rails with accessories ■ Do not exceed the recommended load bearing capacities speciﬁed in the table ■ When disassembling the rails, be sure to re-adjust the clearance 4. Using the guide rails Integrated modular grid Planed faces Micrometric adjustment screw Grease nipple www.norelem.fr www.norelem.co.uk

Open the catalog to page 4

Service Instructions Guide Rails norelem - 5

4. Using the guide rails 4.2 Using and connecting accessories Illustration of movement along the X, Y and Z axes, with a total of three rails Movement rail, following the X axis. The movement rail following the Y axis is positioned above the ﬁrst rail. y To assemble the two rails, unscrew the two fastening screws of rail Y, and move the slide back to reveal the counterbores. 2 Fastening screw Counterbores visible www.norelem.fr www.norelem.co.uk

Open the catalog to page 5

Service Instructions Guide Rails norelem - 6

4. Using the guide rails 4.2 Using and connecting accessories 4 Insert the centring bushes in the through holes of the modular grid to achieve precise positioning Fix the two rails using a fastening screw. Centring bush Fastening screw Restore the rail along the Y axis to its original state. Remember to re-adjust the clearance if necessary. www.norelem.fr www.norelem.co.uk

Open the catalog to page 6

Service Instructions Guide Rails norelem - 7

4. Using the guide rails 4.2 Using and connecting accessories 6 Attach a mounting bracket to the rail to create a Z axis. Mounting bracket Perform the same operations as described in Step 4 to attach the Z axis to the X and Y axes. Centring bush Fastening screw www.norelem.fr www.norelem.co.uk

Open the catalog to page 7

Service Instructions Guide Rails norelem - 8

4. Using the guide rails 4.2 Using and connecting accessories 8 Example of a displacement assembly on the X, Y and Z axes. www.norelem.fr www.norelem.co.uk

Open the catalog to page 8

Service Instructions Guide Rails norelem - 9

Parallelism in the central position Movement tolerances, measured across the entire travel path Guide rail with dovetail mount, cast iron:

Open the catalog to page 9

Service Instructions Guide Rails norelem - 10

5.1 Lubrication Lubricating norelem guide rails ensures protection against corrosion, and reduces wear. Depending on stresses and the environmental conditions, the ﬁrst lubrication can be effective for several years. However, be careful not to leave a rail without corrosion protection if the lubrication disappears. It is important to avoid the ingress of cutting oil or spray emulsion, as this can dilute the lubricant, and cause it to spread. In addition, these emulsions tend to become sticky when drying. Lubricants containing solid additives must also be avoided. Grey cast iron dovetail...

Open the catalog to page 10

Service Instructions Guide Rails norelem - 11

Green Means Go. Find it. Get it. Go. ■ 60,000 products available from stock. ■ Technical support listening to all your questions, giving advice and assisting you in making decisions. ■ Fast and simple implemention of your ideas with our free CAD-data. www.norelem.fr www.norelem.co.uk

Open the catalog to page 11