Group: norelem
Catalog excerpts
Compression springs Elastomer buffers Rubber buffers Shock absorbers Gas springs
Open the catalog to page 1Configuration: The service life can be influenced by dividing the spring travel into the working travel and the preload travel. The smaller the difference between the spring travel and the unloaded length, the higher the expected service life. Select a preload as large as possible and a working travel that is as small as necessary to maximise the service life. LO = unloaded length L = loaded length AW = working travel VW = preload travel S = spring travel Ratio of loaded and unloaded spring length: Light load Loaded length L (mm) spring travel S in % of LO Loaded length L (mm) spring travel...
Open the catalog to page 326000 Compression springs ISO 10243, light load Material: Chrome silicon steel. Version: Green Sample order: nlm 26000-1005025 Note: Lengths, diameters, forces and colour correspond to ISO 10243. F1 indicates the load on the spring for a long service life with spring travel of 25% of L0. F2 indicates the load on the spring for a medium service life with spring travel of 30% of L0. Fmax. indicates the maximum load rating of the spring with spring travel of 40% of L0. F = force required to compress the spring 1 mm.
Open the catalog to page 4Compression springs
Open the catalog to page 526001 Compression springs ISO 10243, moderate load Material: Chrome silicon steel. Version: blue. Sample order: nlm 26001-1005025 Note: Lengths, diameters, forces and colour correspond to ISO 10243. F1 indicates the load on the spring for a long service life with spring travel of 25% of L0. F2 indicates the load on the spring for a medium service life with spring travel of 30% of L0. Fmax. indicates the maximum load rating of the spring with spring travel of 37.5% of L0. F = force required to compress the spring 1 mm.
Open the catalog to page 6Compression springs
Open the catalog to page 726002 Compression springs ISO 10243, heavy load Material: Chrome silicon steel. Version: Red Sample order: nlm 26002-1005025 Note: Lengths, diameters, forces and colour correspond to ISO 10243. F1 indicates the load on the spring for a long service life with spring travel of 20% of L0. F2 indicates the load on the spring for a medium service life with spring travel of 25% of L0. Fmax. indicates the maximum load rating of the spring with spring travel of 30% of L0. F = force required to compress the spring 1 mm.
Open the catalog to page 8Compression springs
Open the catalog to page 926003 Compression springs ISO 10243, very heavy load Material: Chrome silicon steel. Version: yellow. Sample order: nlm 26003-1005025 Note: Lengths, diameters, forces and colour correspond to ISO 10243. F1 indicates the load on the spring for a long service life with spring travel of 17% of L0. F2 indicates the load on the spring for a medium service life with spring travel of 20% of L0. Fmax. indicates the maximum load rating of the spring with spring travel of 25% of L0. F = force required to compress the spring 1 mm.
Open the catalog to page 10Compression springs ISO 10243, very heavy load
Open the catalog to page 1126090 Elastomer buffers Shore 70A Material: Polyurethane. Version: Soft Shore hardness 70A ±5. Colour black. Sample order: nlm 26090-02001670 Note: Elastomer buffers are characterised by high load capacity, long service life and high economy due to being entirely maintenance-free. They also provide outstanding protection for persons and machines since the buffers do not rupture when overloaded. They are used to insulate and dampen air and structure-borne sound and offer progressive buffering characteristics with sustained excellent performance. They are also resistant to grease and oils...
Open the catalog to page 12Elastomer buffers Shore 80A Material: Polyurethane. Version: Medium Shore hardness 80A ±5. Colour yellow. Note: Elastomer buffers are characterised by high load capacity, long service life and high economy due to being entirely maintenance-free. They also provide outstanding protection for persons and machines since the buffers do not rupture when overloaded. They are used to insulate and dampen air and structure-borne sound and offer progressive buffering characteristics with sustained excellent performance. They are also resistant to grease and oils and, in terms of performance and...
Open the catalog to page 1326092 Elastomer buffers Shore 90A Material: Polyurethane. Version: Hard Shore hardness 90A ±5. Colour red. Sample order: nlm 26092-02001690 Note: Elastomer buffers are characterised by high load capacity, long service life and high economy due to being entirely maintenance-free. They also provide outstanding protection for persons and machines since the buffers do not rupture when overloaded. They are used to insulate and dampen air and structureborne sound and offer progressive buffering characteristics with sustained excellent performance. They are also resistant to grease and oils and,...
Open the catalog to page 14Compressive loads Spring rate c2 Permissible load in N/mm F in N hard medium soft hard medium soft Shear stresses Spring rate cx, y Permissible load in N/mm F in N hard medium soft hard medium soft Compressive loads Spring rate c2 Permissible load in N/mm F in N medium medium 150 260 330 730 Rubber hardness: D hard = Shore 70 medium = Shore 55 soft = Shore 45 For general guidance natural rubber is ca. Shore 55. static compression load: F (max.) = ca. 6.5 kg/cm² (63.77 N/cm²) static axial load: F (max.) = ca. 1.5 kg/cm² (14.72 N/cm²) by 10 % spring displacement, or transverse travel during...
Open the catalog to page 1526100 Rubber buffers steel or stainless steel, type A Material: Metal parts steel grade 5.6 or stainless steel. Elastomer natural rubber, medium hardness, Shore 55A. Main material On request: Other Shore grades. Version: Steel electro zinc-plated. Stainless steel bright. Sample order: nlm 26100-00800855 Note: The rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery. stainless steel stainless steel stainless steel stainless steel stainless steel stainless steel
Open the catalog to page 1626101 Rubber buffers type AT tapered Material: Metal parts, steel, grade 5.6. Elastomer natural rubber, medium hardness, Shore 57A. Version: Steel electro zinc-plated. Note: These rubber buffers are widely used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery. Rubber buffers with tapered rubber contour reduce high edge loads of the rubber by radial deflection and so increase the components service life. On request: Other Shore grades.
Open the catalog to page 17All Norelem - Éléments standard mécaniques catalogs and technical brochures
-
Assembly system
72 Pages
-
Pneumatic cylinder
9 Pages
-
Drive technology
235 Pages
-
Tube connectors - Tube columns
59 Pages
-
Concentricity elements
10 Pages
-
Connectors Energy chains
18 Pages
-
Power supply units
3 Pages
-
Sensor technology
4 Pages
-
Motors - Lifting columns
11 Pages
-
Material handling and transport
45 Pages
-
technoshop
38 Pages
-
BROCHURE TELESCOPIC SLIDES 2021
88 Pages
-
PRODUCT OVERVIEW EDITION 2022
43 Pages
-
THE BIG GREEN BOOK edition 2022 vol.2
1336 Pages
-
THE BIG GREEN BOOK edition 2022 vol.1
1380 Pages
-
Guide rails norelem
20 Pages
-
ALUMINIUM PROFILES
104 Pages
Archived catalogs
-
01250
2 Pages
-
01148 Subplates
1 Pages
-
01148 Subplates
1 Pages
-
Norelem Edition 2019
1986 Pages
-
THE BIG GREEN BOOK edition 2019
1986 Pages
-
THE BIG GREEN BOOK 2018
1767 Pages
-
BIG GREEN BOOK 2017
1590 Pages
-
BGB
1456 Pages
-
BIG GREEN BOOK
1 Pages
-
01148 Pallets
1 Pages
-
01127 Base plates
1 Pages
-
01060 Steel base plates
1 Pages