Group: norelem
Catalog excerpts
Slides Guide rails Positioning stages Linear guide systems Position indicators
Open the catalog to page 121000 Dovetail slides with micrometer spindle 21000-020 ... Advantages: - Innovative and safe clamping system without height or lateral displacement. - No play in guides. - Rapid subsequent combination in X, Y and Z axes. M1 = counterbore for screw. TI = number of fastening holes E1/E2/M1 inside. TA = number of fastening holes E/E1/MA outside. Applications: - Adjustment of machining units, metrology cameras, mirrors, microscopes and laser heads (including the machining of surgical needles). - Fine adjustment of brazing, plasma and welding heads. - Focussing of flame nozzles. Sample order:...
Open the catalog to page 2with micrometer spindle
Open the catalog to page 3Material: Aluminium EN AW-6063 Sample order: nlm 21000-020 (1 strap with clamping screw) Note: The straps are used to clamp the dovetail slides in the X, Y and Z axes and to fix the slide unit in the machine. End mounting will reduce the travel. travel reduction
Open the catalog to page 4Fastening screws for cross table mounting Material: Steel. Version: tempered. Sample order: nlm 21000-02055 (Supplied in sets of four) Note: Mounting set for constructing a cross table. Four fastening screws per set.
Open the catalog to page 521010 Dovetail slides with micrometer spindle and location holes E E1 Advantages: An additional centring hole is located at all tapped holes. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240. Quick and retrofit combination in the X, Y and Z axes. TI = number of fastening holes E1/E2/MI inside. TA = number of fastening holes E/E1/MA outside. TM = number of centring holes D1 inside. TN = number of centring holes D1 outside. Version: Black anodised Note: These precision dovetail slides find use in e.g. machine and fixture...
Open the catalog to page 6Dovetail slides with micrometer spindle
Open the catalog to page 7Version: Black anodised Sample order: nlm 21010-01-020 Note: With these mounting brackets, two slides can be connected in an X-Y configuration without any reduction in travel. In connection with our centring rings 20240, the vertical slide can be centred to fit precisely on the horizontal slide and fastened with screws DIN 912 (07160).
Open the catalog to page 8Sample order: nlm 21030-050105 Note: These precision dovetail slides find use in machine and fixture construction, metrology, optical instruments and fine mechanics. The middle set screw “N” can be replaced by clamping lever Art. No. 06460. The stated permissible load ratings (F) are designed for dynamic loads with a lifespan of 1 million travel cycles. For static loads 10 times the F value is permitted. The torque values apply only for centred carriages. Version: Bright, ground. TI = number of fastening holes E/M inside TA = number of fastening holes E/M outside
Open the catalog to page 921031 Dovetail slides with end plates My Version: Bright, ground. Mz Sample order: nlm 21031-100135 Note: The central set screw “N” can be replaced by a clamping lever 06460. The stated permissible load values (F) are designed for dynamic loads with a lifespan of 1 million travel cycles. For static loads 10 times the value F is permitted. The torque values apply only to centred carriages. TI = number of fastening holes E/M inside TA = number of fastening holes E/M outside
Open the catalog to page 1021032 Dovetail slides with micrometer spindle Version: Bright, ground. Note: The central set screw „N“ can be replaced by a clamping lever 06460. The scale ring is graduated in 0.02 mm increments. Other graduations available on request. The stated permissible load values (F) are designed for dynamic loads with a lifespan of 1 million travel cycles. For static loads 10 times the value F is permitted. The torque values apply only to centred carriages. TI = number of fastening holes E/M inside TA = number of fastening holes E/M outside
Open the catalog to page 1121033 Dovetail slides with micrometer spindle and handwheel My Version: Bright, ground. Mz Sample order: nlm 21033-150310 Note: The central set screw “N” can be replaced by a clamping lever 06460. The micrometer scale is graduated in 0.02 mm increments. Other graduations available on request. The revolving grip on the handwheel can fold down. The stated permissible load values (F) are designed for dynamic loads with a lifespan of 1 million travel cycles. For static loads 10 times the value F is permitted. The torque values apply only to centred carriages. TI = number of fastening holes E/M...
Open the catalog to page 1221034 Precision slides roller mounted Mx Version: Ground Note: A clamp that acts on the side edge without loading the guide geometry can be supplied as an optional extra. F = permissible dynamic or static load. The stated permissible loads (F) are for a lifespan of 1 million travel cycles. The torque values apply only to centred carriages. Cross slides are also available on request. TI = number of fastening holes E/M inside TA = number of fastening holes E/M outside
Open the catalog to page 1321035 Slides mini roller mounted 1 E3 C Material: Outer housing aluminium. Carriage and bearing steel. Note: Roller slides run very lightly and can be adjusted with the set screw “N”. The fastening holes “K” can be used as tapped holes or through holes. The stated permissible loads (F) are for a lifespan of 1 million travel cycles. The torque values apply only to centred carriages. Version: Outer housing black anodised. Carriage and bearings ground. Internal parts hardened. F = permissible loading for dynamic and static loads. TI = number of fastening holes E3/K inside TA = number of...
Open the catalog to page 1421038 Precision slides roller mounted with end plates My Version: Ground Note: Slide is also available in aluminium on request. The stated permissible loads (F) are for a lifespan of 1 million travel cycles. The torque values apply only to centred carriages. Example of slides mounted as a manual cross table Examples of dovetail slides F = permissible loading for dynamic and static loads. TI = number of fastening holes E1/M inside. TA = number of fastening holes E1/M outside.
Open the catalog to page 1521040 Precision slides roller mounted with micrometer spindle My Version: Bright, ground. Note: Slides available in aluminium on request. The scale ring is graduated in 0.02 mm increments. The version 21040-040045 is graduated in 0.01 mm increments. Other graduations are available on request. The stated permissible loads (F) are for a lifespan of 1 million travel cycles. The torque values apply only to centred carriages. F = permissible loading for dynamic and static loads. TI = number of fastening holes E1/M inside. TA = number of fastening holes E1/M outside. * Spacing of external...
Open the catalog to page 16All Norelem - Éléments standard mécaniques catalogs and technical brochures
-
Assembly system
72 Pages
-
Pneumatic cylinder
9 Pages
-
Drive technology
235 Pages
-
Tube connectors - Tube columns
59 Pages
-
Concentricity elements
10 Pages
-
Connectors Energy chains
18 Pages
-
Power supply units
3 Pages
-
Sensor technology
4 Pages
-
Motors - Lifting columns
11 Pages
-
Material handling and transport
45 Pages
-
technoshop
38 Pages
-
BROCHURE TELESCOPIC SLIDES 2021
88 Pages
-
PRODUCT OVERVIEW EDITION 2022
43 Pages
-
THE BIG GREEN BOOK edition 2022 vol.2
1336 Pages
-
THE BIG GREEN BOOK edition 2022 vol.1
1380 Pages
-
Guide rails norelem
20 Pages
-
ALUMINIUM PROFILES
104 Pages
Archived catalogs
-
01250
2 Pages
-
01148 Subplates
1 Pages
-
01148 Subplates
1 Pages
-
Norelem Edition 2019
1986 Pages
-
THE BIG GREEN BOOK edition 2019
1986 Pages
-
THE BIG GREEN BOOK 2018
1767 Pages
-
BIG GREEN BOOK 2017
1590 Pages
-
BGB
1456 Pages
-
BIG GREEN BOOK
1 Pages
-
01148 Pallets
1 Pages
-
01127 Base plates
1 Pages
-
01060 Steel base plates
1 Pages