*mydirectindustry

Assembly system

Product catalog summary

Technical Specifications:
The document details aluminium profiles, specifically Type I and Type B, adhering to DIN EN 12020 Part 2 standards. They are anodised with a 10 µm film thickness for scratch resistance and corrosion proofing. Mechanical properties include a tensile strength of at least 245 N/mm² and a yield point of 195 N/mm².

Material and Version:
Profiles are made from Aluminium EN AW-6063 T66, with a maximum length of 6000 mm. Mitre cuts are available upon request.

Profile Types and Dimensions:
Various profiles are listed with dimensions such as 30x30, 60x60, and 90x90, including details like slot width and weight per meter.

Applications and Notes:
Designed for weight-optimised constructions and structural applications, suitable for roller rails and tracks.

Aluminium Profiles and Connecting Sets:
Specifications for profiles and connecting sets are provided, made from Aluminium EN AW-6063 T66. Connecting sets are made from steel or die-cast zinc, with some components in fibreglass-reinforced polyamide.

Procedures:
Assembly procedures for connecting sets include drilling and using self-tapping screws, emphasizing low workload assembly.

Types of Connecting Sets:
Includes Standard Type I, Universal Type I, Central Type B, Automatic Type I and B, Pin Connector Sets Type B, and Cube Connector Sets Type B, each with specific applications and load capacities.

Applications:
Used in modular setups like roller rails and shelving, maintaining profile slot integrity for additional components.

Recommendations:
Use lubricants for self-tapping threads and pair connectors for optimal strength.

Overview:
Technical specifications and usage notes for components like angle sets, clamping angles, joint angles, end caps, cover profiles, slide rails, foot plates, bearing flanges, roller elements, and brakes are provided.

Angle Sets:
Type B angle sets fasten profiles at 45°, made of anodised aluminium.

Clamping Angles:
Type I clamping angles connect profiles at any angle, allowing rotation and sliding.

Joint Angles:
Type I joint angles serve as pivot points for crossed profiles.

End Caps:
Type B and I end caps prevent dirt ingress and injuries.

Cover and Adapter Profiles:
Seal profile slots against dust and dirt.

Slide Rails:
Provide low-wear, low-friction surfaces.

Foot Plates:
Used for mounting levelling feet, made of die-cast zinc.

Bearing Flanges:
Part of feed roller systems, made of PA-GF with steel bolts.

Roller Elements:
Plastic elements for quick mounting, suitable for low-vibration conveyance.

Brakes:
Stainless steel brakes ensure soft braking of heavy workpieces.

Overview:
Specifications and applications for components like brush elements, spacers, backstop elements, slide ramps, end plates, suspension brackets, and more are detailed.

Specifications:
Components made from materials like polyamide, polypropylene, and steel, with various reinforcements.

Procedures:
Many components are designed for tool-less installation.

Applications:
Used in roller rails, ESD protection, and ATEX compliance environments.

Recommendations:
Ensure compatibility with profile types and follow mounting instructions.

Overview:
Technical specifications for clip-in bins, swivel adapters, and cup holders for ESD-sensitive environments are provided.

Specifications:
Clip-in bins and swivel adapters are made from reinforced PA, suitable for ESD protection areas.

Applications:
Essential for environments handling ESD-sensitive equipment, conforming to DIN EN 61340-5-1 standards.

Safety and Compliance:
Products prevent electrostatic spark discharges, certified by TÜV-Süd.

Accessories:
Swivel adapter 10550-10 is available for use with clip-in bins.

Catalog excerpts

Aluminium profiles Connectors Covers Special elements

Open the catalog to page 1

Technical information for aluminium profiles Type I and Type B Tolerances: Form deviations such as straightness and flatness tolerance acc. to DIN EN 12020 Part 2. Surface: The aluminium profiles are natural tone anodised making them permanently scratch-resistant and corrosion proof. The all-round anodise film makes saw cuts particularly low burr. Anodising: E6EV1 Film thickness: 10 µm Mechanical values: (apply only in thrust axis) Tensile strength Rm: min. 245 N/mm² Yield point Rp 0.2: min. 195 N/mm² A5: 10% rupture stress A10: 8% rupture stress Density: 2.7 kg/dm³ Linear expansion coefficient:...

Open the catalog to page 2

10025 Aluminium profiles 30x30 light Type I 6 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10025-063030X* * Include length only in full mm increments. Maximum available length 6000 mm. On request: Mitre cuts 15°, 30° and 45°. Note: Lightweight aluminium profile for weight-optimised constructions. Slot width 10025 Aluminium profiles 30x60 light Type I 6 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. On request: Mitre cuts 15°, 30° and 45°. Sample order: nlm 10025-063060X*...

Open the catalog to page 3

10025 Aluminium profiles 60x60 light Type I 6 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10025-066060X* * Include length only in full mm increments. Maximum available length 6000 mm. On request: Mitre cuts 15°, 30° and 45°. Note: Lightweight aluminium profile for weight-optimised constructions. Slot width

Open the catalog to page 4

10045 Aluminium profiles 40x40 light Type I 8 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Sample order: nlm 10045-084040X* * Include length only in full mm increments. Maximum available length 6000 mm. Version: Artificially aged, natural colour anodised. On request: Mitre cuts 15°, 30° and 45°. Note: Lightweight aluminium profile for weight-optimised constructions. Slot width 10045 Aluminium profiles 40x80 light Type I 8 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. On request: Mitre cuts 15°, 30° and 45°. Sample order: nlm 10045-084080X*...

Open the catalog to page 5

10045 Aluminium profiles 80x80 light Type I 40 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10045-088080X* * Include length only in full mm increments. Maximum available length 6000 mm. Note: Lightweight aluminium profile for weight-optimised constructions. On request: Mitre cuts 15°, 30° and 45°. Slot width

Open the catalog to page 6

10048 Aluminium profiles 16x40 Type I 8 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) On request: Mitre cuts 15°, 30° and 45°. Sample order: nlm 10048-081640X* * Include length only in full mm increments. Maximum available length 6000 mm. Note: Aluminium profile for general constructions. F1 Slot width Version: Artificially aged, natural colour anodised. 10048 Aluminium profiles 40x40 Type I 8 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. On request: Mitre cuts 15°, 30° and 45°. Sample order: nlm 10048-084040X* * Include length...

Open the catalog to page 7

10048 Aluminium profiles 40x80 Type I 40 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. On request: Mitre cuts 15°, 30° and 45°. Sample order: nlm 10048-084080X* * Include length only in full mm increments. Maximum available length 6000 mm. Note: Aluminium profile for general constructions. Order No. Slot width 10048 Aluminium profiles 80x80 Type I 40 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10048-088080X* * Include length only in full mm increments. Maximum...

Open the catalog to page 8

Aluminium profiles D50 Type I, tube Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Note: Aluminium profile for general structures. The round tube, also referred to as a profile tube forms a feed roller when used in combination with bearing flanges (10400). Aluminium profiles 40x40 for roller rails, Type I Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10051-084040X* * Include length only in full mm increments. Maximum available length 6000 mm. Note: The aluminium...

Open the catalog to page 9

10140 Aluminium profiles 30x30 Type B 30 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) On request: Mitre cuts 15°, 30° and 45°. Version: Artificially aged, natural colour anodised. Sample order: nlm 10140-083030X* * Include length only in full mm increments. Maximum available length 6000 mm. Note: Aluminium profile for general constructions. Slot width 10140 Aluminium profiles 30x60 Type B 30 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) On request: Mitre cuts 15°, 30° and 45°. Version: Artificially aged, natural colour anodised. Sample order: nlm 10140-083060X* * Include length only...

Open the catalog to page 10

10142 Aluminium profiles 40x40 light Type B 10 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. On request: Mitre cuts 15°, 30° and 45°. Sample order: nlm 10142-104040X* * Include length only in full mm increments. Maximum available length 6000 mm. Note: Lightweight aluminium profile for weight-optimised constructions. Slot width 10142 Aluminium profiles 40x80 light Type B 10 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10142-104080X* * Include length only in full...

Open the catalog to page 11

10157 Aluminium profiles 45x45 light Type B 45 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Version: Artificially aged, natural colour anodised. Sample order: nlm 10157-104545X* * Include length only in full mm increments. Maximum available length 6000 mm. On request: Mitre cuts 15°, 30° and 45°. Note: Lightweight aluminium profile for weight-optimised constructions. Slot width 10157 Aluminium profiles 45x90 light Type B 45 Material: Aluminium EN AW-6063 T66 (AIMgSi 0.5 F25) Sample order: nlm 10157-104590X* * Include length only in full mm increments. Maximum available length 6000 mm....

Open the catalog to page 12

Assembly system

Assembly system

Catalog excerpts

All Norelem - Éléments standard mécaniques catalogs and technical brochures

Archived catalogs