JCP 1724 Jet Cleaner Remove Polymers and Compounds from Metallic Parts Suitable for removing from metal parts and extrusion hardware all types of thermoplastic and thermoset compounds in a safe, ef cient manner without the use of cleaning media. ene ts Capable of removing most polymeric materials Fast cleaning cycle Simple operation Reliable and maintenance-free operation Gentle cleaning extends part life Operator safety Energy-saving operation Labor saving FEP - OPTIONAL UNIT AVAILABLE Safety Since cleaning takes place under vacuum, combustion does not occur. This feature provides a high degree of operator safety and the parts are equally protected from excessive or localized high temperatures, insuring freedom from annealing and stress cracking. The Model JCP 1724 Jet Cleaner with working dimensions of 15 ½ “ and 23 ½” depth (393.7 mm and 596.9 mm) depth represents one of the most popular model sizes of the Nordson XALOY Jet Cleaner product line. It is ideally suited for small to intermediate size cleaning applications. All Nordson XALOY Jet Cleaners utilize heat and vacuum to remove material such as thermoplastic from metal parts. In most cases cleaning cycles are accomplished within 120-240 minutes at an operating temperature range between 800°F and 900°F (426.7°C and 482.2°C) and a vacuum of 25 inches (635 mm) of mercury. The unit can be easily installed in any area having available facilities of water supply, water drain and electrical power. are heated in an oxygen starved chamber where the polymer melts and vacuum pump shut down. Cleaning is totally automatic. and drains into the primary trap The operator then simply opens The operator loads the parts into collector pan. Remaining polymer is the chamber door, removes the Clean your tooling by removing material, not burning it away. Cleaning in an oxygen starved chamber eliminates combustion and minimizes environmental impact. Consult our Environmental Report for additional details. the parts tray, moves the carriage vaporized and then water scrubbed cleaned parts, checks and cleans assembly to the operating position, in a secondary trap where conden- the traps if necessary and the unit is secures the door, sets the cycle time sates are collected in a secondary ready for another cycle. and temperature, starts the unit and walks away. The parts to be cleaned cycle the chamber is automatically

Cleanin Capacity dimensions (inches) * Depends on weight of part(s) to be cleaned. Primary Trap: Located beneath and attached to the chamber, collects any melted resin. Trap consists of a cast aluminum housing with swing bolt clamped cover containing a seal gasket. Removable stainless steel collector pan is included. ater Vap r eparati n: Located in the vacuum pump outlet line. It directs water to drain and vapors to atmosphere. Customer provides pipe connection to atmosphere and locates and wires optional exhaust fan. Positioned vertically in the pipe run between the chamber and vacuum pump....