Autoflex Technology Ensure unsurpassed product quality and performance when you partner with the industry’s leader in flat die manufacturing and technology. Benefits of Autoflex Technology educe gauge variation and increase product R yield when paired with processor based gauging system liminate heat transfer between die body, lip, E and translator block with heating unit isolated above the flexible lip die body educe operational adjustments with automatic R mode allowing for more linear movement chieve a balanced and repeated fast response A with air cooling ported to each translator ine manual tuning is possible with differential F adjustment system An Autoflex system uses thermal expansion and contraction of the lip adjusting unit to make finer adjustments to the flexible lip than are possible with strictly mechanical means. Each lip adjusting position is fitted with a block containing a heater and an air cooling path. Inherent in the system is complete manual override, so that the approximate gauge uniformity is established in the conventional manner before the thermal system is engaged. The thermal adjusting system utilizes an electrical source for each adjusting point to increase or decrease the temperature of the adjusting block, thereby changing the lip opening. 660mm (26”) Autoflex VI-R H40 Triple Manifold Die and Distribution

Autoflex Technology Autoflex VI Design - Fixed Assembly Installed on thousands of dies worldwide, the Autoflex automatic lip adjusting system is the premier technology for precisely controlling the thickness profile of the film and sheet. In addition to making possible higher quality, more accurate products, the Autoflex system can generate substantial raw material savings compared to conventional manual adjustment. The simplicity of design and proven accuracy in production in the field makes Autoflex the world’s preferred automatic die bolt control system. Autoflex VI-R Design - Modular Assembly...