Catalogs >
Nordson Measurement & Control >
Accuscan 1000 Series: Single-Plane Diameter Measurement

Accuscan 1000 Series: Single-Plane Diameter Measurement
4Pages

Catalog excerpts

Accuscan 1000 Series: Single-Plane Diameter Measurement - 1

AccuScan 1000™ : Accurate, Versatile Diameter Measurement The next generation of the industry's most dependable and accurate diameter gauge.

Open the catalog to page 1

Accuscan 1000 Series: Single-Plane Diameter Measurement - 2

Intelligent Dimensional Measurement The AccuScan 1000ô family of modular AS1100 gauges is the latest generation of laser micrometers from the inventors of the laser micrometer. The AccuScan 1000 series has integrated measurement and communications capabilities while maintaining the accuracy and reliability youíve come to expect from Beta LaserMike. Due to in-head Digital Signal Processing, higher scan rates, Fieldbus connectivity and enhance measurement algorithms, the AccuScan 1000 series can go where no laser micrometer has gone before. With a range of models covering dimensions up to 330...

Open the catalog to page 2

Accuscan 1000 Series: Single-Plane Diameter Measurement - 3

Gate Size (distance between receiver & transmitter) Airwipe Input Pressure Pressure Tube Size Contact Beta LaserMike for details. 9.53 mm (3/8 in.) ID with approx. 6.35 mm (0.25 in.) ID. (Tube connects to the filter using a 1/4 NPT 3/8 tube straight fitting LEGRIS 31756014 if needed) Environmental Altitude* Ambient Operating Temp. Ambient Storage Temp. 80% for temp. up to 31∞C or 88∞F (decreasing linearly to 50% relative humidity at 40∞C or 104∞F) Installation Category* Pollution Degree* Pollution degree 1 Equipment has been designed for operation with a level of pollution of its internal...

Open the catalog to page 3

Accuscan 1000 Series: Single-Plane Diameter Measurement - 4

Connection Specifications RS232 connection General Non Isolated 5 wire port: Rx, Tx RTS, CTS, 0V. Only 3 wires used for calibration. Full duplex. Baud rates: 4800 ñ 38400. 1 start, 7 data, 2 stop bits OR 1 start, 8 data, 1 stop bit. Cable length 15m (50ft) for baudrate of 9600bps. Longer cables may work, but this will depend on capacitance and quality of cable. If problems occur with longer cables, a RS232/RS422 converter box can be purchased from Beta LaserMike. DTE/DCE configuration Cable length 39m* (128ft) at 500 KBps 78m* (256ft) at 250 KBps 156m* (512ft) at 125 KBps * cumulative...

Open the catalog to page 4