*mydirectindustry

Catalogs
Nordson Industrial Coating Systems
StediFlo Medium to High Pressure Pumps

StediFlo Medium to High Pressure Pumps

Product catalog summary

Overview: StediFlo pumps are designed to set new standards in efficiency and performance for liquid applications. They offer versatility and high performance to meet various pressure and volume requirements, making them suitable for a range of finishing applications.

Design and Maintenance: The pumps are designed for durability and ease of service, featuring fewer parts and self-adjusting packings that reduce maintenance needs. They allow for easy adjustment of pressure ratio and output by changing the air motor.

Specifications: StediFlo pumps are available in pressure ratios of 10:1, 18:1, 32:1, and 57:1. They are constructed from stainless steel, making them ideal for water-based coatings and suitable for airless or air-assisted airless applications with both hot and cold materials.

Features and Benefits:

Self-adjusting packings reduce wear and lower maintenance costs.
Fewer components facilitate easy assembly and disassembly.
A closed lubrication chamber prevents contamination between the air motor and material pump.
Large pump openings and fluid passages reduce pressure loss and improve flushing.
A large built-in muffler reduces noise levels, contributing to an environmentally friendly design.
A built-in run-away valve decreases wear and tear on the pump.

Technical Specifications:

Pressure ratios: 10:1, 18:1, 32:1, 57:1
Output per cycle varies from 0.007 gal (27 cm³) to 0.1 gal (360 cm³).
Fluid flow at 15 cpm ranges from 0.1 gal/min (0.4 l/min) to 1.43 gal/min (5.4 l/min).
Fluid flow at 30 cpm ranges from 0.2 gal/min (0.8 l/min) to 2.86 gal/min (10.8 l/min).
Maximum air inlet pressure is 116 psi (8 bar) for most models, with a maximum operating pressure ranging from 1160 psi (80 bar) to 5786 psi (399 bar).
Piston diameters and strokes vary by model.

Contact Information: For more information, contact Nordson Corporation at their regional offices in the United States, Canada, Europe, Japan, China, and other regions.

Catalog excerpts

StediFlo ™ Medium to High Pressure Pumps 10:1, 18:1, 32:1 and 57:1 ratio pumps for a wide range of materials. StediFlo pumps set new standards for efficiency and performance in liquid applications. They provide versatility and high performance to meet a wide range of pressure and volume requirements. Designed for durability and ease of service, StediFlo pumps are ideally suited for a variety of finishing applications. With fewer parts and self-adjusting packings, StediFlo pumps are easy to maintain and require minimal repair. StediFlo pumps also allow for easy adjustment of pressure ratio and output if the usage conditions change, requiring the operator to only change the air motor. StediFlo pumps are available in 10:1, 18:1, 32:1 and 57:1 pressure ratios and are available with a variety of packing glands. All units are stainless steel, making them ideal for use with water-based coatings. In addition, they can be used for airless or air-assisted airless applications and with hot or cold materials. Features and Benefits Self-adjusting packings reduce wear – lower maintenance costs. Fewer components – for easy assembly and disassembly. Closed lubrication chamber separates the air motor and the material pump – prevents contamination. Large pump openings and fluid passages – reduce pressure loss and provide better flushing. reduces noise levels for an environmentally friendly design. Large built-in muffler – Built-in run-away valve – the pump. decreases wear and tear on

Open the catalog to page 1

StediFlo Medium to High Pressure Pumps-2

StediFlo™ Medium to High Pressure Pumps Gun For more Technical Specifications information, Model 10:1 18:1 32:1 57:1 speak with Pressure ratio 10:1 18:1 32:1 57:1 your Nordson Output/cycle .007 gal (27 cm3) .02 gal (72 cm3) .02 gal (72 cm3) 0.1 gal (360 cm3) representative Fluid flow at 15 cpm 0.1 gal/min (.4 l/min) .29 gal/min (1.1 l/min) .29 gal/min (1.1 l/min) 1.43 gal/min (5.4 l/min) your Nordson Fluid flow at 30 cpm .2 gal/min (.8 l/min) .58 gal/min (2.2 l/min) .58 gal/min (2.2 l/min) 2.86 gal/min (10.8 l/min) Max. air inlet pressure 116 psi (8 bar) 116 psi (8 bar) 116 psi (8 bar) 101.5...

Open the catalog to page 2

All Nordson Industrial Coating Systems catalogs and technical brochures

Archived catalogs

Electrostatic paint sprayer for waterborne paint
4 Pages