StediFlo ™ Low to Medium Pressure Pumps 3:1, 6:1, 8:1 and 12:1 ratio pumps for a wide range of materials. StediFlo pumps set new standards for efficiency and performance in liquid applications. They provide versatility and high performance to meet a wide range of pressure and volume requirements. Designed for durability and ease of service, StediFlo pumps are ideally suited for a variety of finishing applications. With fewer parts and adjustable packings, StediFlo pumps are easy to maintain and require minimal repair. StediFlo pumps also allow for easy adjustment of pressure ratio and output if the usage conditions change, requiring the operator to only change the air motor. StediFlo pumps are available in 3:1, 6:1, 8:1 and 12:1 pressure ratios and are available with a variety of packing glands. All units are stainless steel making them ideal for use with water-based coatings. Features and Benefits Adjustable packings reduce wear – lower maintenance costs. Fewer components – for easy assembly and disassembly. Closed lubrication chamber separates the air motor and the material pump – prevents contamination. Large pump openings and fluid passages – reduce pressure loss and provide better flushing. reduces noise levels for an environmentally friendly design. Large built-in muffler – Built-in run-away valve – the pump. decreases wear and tear on

StediFlo™ Low to Medium Pressure Pumps For more Technical Specifications information, Model 3:1 6:1 8:1 12:1 Pressure ratio 3:1 6:1 8:1 12:1 Output/cycle .16 gal (600 cm3) .16 gal (600 cm3) .04 gal (150 cm3) .16 gal (600 cm3) Fluid flow at 15 cpm 2.4 gal/min (9.1 l/min) 2.4 gal/min (9.1 l/min) 0.6 gal/min (2.3 l/min) 2.4 gal/min (9.1 l/min) Fluid flow at 30 cpm 4.8 gal/min (18.2 l/min) 4.8 gal/min (18.2 l/min) 1.2 gal/min (4.6 l/min) 4.8 gal/min (18.2 l/min) Max. air inlet pressure 116 psi (8 bar) 116 psi (8 bar) 116 psi (8 bar) 101.5 psi (7 bar) Max. permissible operating pressure 348 psi (24...