MEG® Inside-Stripe Applicator Compact electric spray gun for three-piece can inside stripe with ultra high-speed response enabling fast operation and high accuracy. Using Nordson's flow coat style nozzles, the MEG l-S assures accurate and precise seam coverage at the required film thickness with virtually ■ Extremely fast for use on high-speed welders. ■ Fast response time for accuracy and consistency to minimize stripe variations. ■ Cool operation minimizes film build-up inside the gun. ■ No internal metal-to-metal friction for less wear, longer service life and cooler operation. ■ Compact size for use with various-sized cans ■ Precise film deposition with the applicator along with flow coat nozzle provide a uniform stripe with superior accuracy, repeatability and control. ■ Modular design permits easy on-line replacement ■ Adjustable nozzle holder for online spray adjustment. ■ Circulating manifold with 4-mm tube fittings. The Nordson MEG* compact electric gun provides high-speed precise interior striping of three-piece welded containers. It is designed to coat the welded-seam of three-piece cans at rates of over 1000 cans per minute and can be used with cans as small The applicator is designed for fast, easy maintenance and repair, to minimize downtime and enhance productivity. A wide range of spray nozzles is available to meet various application needs for film thickness and stripe width. Fast Response Time, Reliable Operation Consistent, repeatable fast open and close times provide faster operating speeds and gives consistent, reliable application The MEG inside-stripe (I-S) applicator has few internal friction points, contributing to a faster response time, and reducing wear and heat generation in the gun. The coil and armature assembly is specially designed to create less heat than other electric guns for reliable operation and longer wear of the parts. The overall cooler operation of the gun reduces film build-up inside the gun and minimizes valve sticking. Precise Coating Control Using Nordson's flow coat style nozzles, the MEG I-S assures accurate and precise seam coverage at the required film thickness with virtually no overspray. The MEG I-S applicator allows the nozzle to be positioned in close proximity to the inside seam of small diameter cans so coating material can be applied in a continuous film rather than an atomized spray. The flow coat application provides precise control of stripe width, film thickness and weight, and also eliminates bounceback and overspray for

MEG® Inside-Stripe Applicator Ease of Maintenance and Repair The ball and seat assembly is designed to minimize wear, which greatly extends the product life of the gun. When repairs are needed, the gun module can be replaced online for minimal downtime. The gun body has been designed for easier maintenance, and the seat holder has an indexing ability so the seat can be rotated to promote uniform wear on the contact points of the coil face. Altogether the gun contains few moving parts to simplify rebuilding and minimize replacement-part inventories. When repairs are needed, the gun module can...