2100-127 Series Snuf-Bak™ Air Operated Fluid Dispense Valve Fluid Dispense Valve For On/Off Flow Control Of Medium To High Viscosity Materials Snuf-Bak Action Effectively Breaks The Flow Of Material Reducing Time-consuming Dripping Immediate Start Or Stop Of Material Flow Double Air Operated - Air To Open, Air To Close Carbide Hardened Components Readily Fixtured Or Mounted Teflon Packings Carbon Steel Wetted Components (S.S. Available) Divorced Design ¼” NPT(F) Material Inlet And Outlet Ports 2100-127-000-DP Snuf-Bak Dispense Valve Snuf-Bak™ valve for dispensing medium to high viscosity single component adhesives, or reactive resins that can be solvent flushed. The valve's unique Snuf-Bak action insures a quick, positive stop of material flow when the valve is closed - without the stringing of material. The standard valve requires air pressure to open and close. The valve includes Teflon™ packings, a hardened and chromed needle, and ¼" N.P.T.F inlet and outlet. and ¼" N.P.T.F inlet and outlet. Its outlet accepts a broad range of dispense nozzles. The valve is made with a 25/64" diameter drill thru hole for fixturing. A fixture rod may be secured in position using the 1/4-20 threaded hole intersecting with the fixture hole. Models are available with stainless steel wetted components, flow adjustments, heat ports, and pistol grip style handles. A 4-way valve (not included) is required to operate the valve. 45677 Helm Street • P.O. Box 701460 • Plymouth, MI 48170 • USA Phone: (734) 459-8600 • Fax: (734) 459-8686 E-mail: [email protected] • Web: www.

2100-127 Series Snuf-Bak™ Dispense Valve Specifications: Weight: Length: Diameter: Max. Inlet Pressure: Material Inlet: Material Outlet: Air Ports: Air Pressure Required: Drill Thru: Mounting Hole: Packings: Service Kit: Construction: 1.5 Pounds; 24 Ounces 5.56" (Without Nozzle) 2.20" 3,500 PSI ¼” N.P.T.F. ¼” N.P.T.F. (2) 1/8" N.P.T.F. (Air To Open/Close) 60 P.S.I. (4.0 Bar) Minimum 0.39" #10-24 Drill Thru With Locking Set Screw Flat Teflon™ Packings 2150-34T Air Cylinder - Aluminum Inlet/Body - Carbon Steel Typical Compatible Materials: • One Part Epoxies • One Part Silicones • One Part Urethanes...