Catalogs >
Nordson Efd >
Series 450RC Autovalve

Series 450RC Autovalve
4Pages

Catalog excerpts

Series 450RC Autovalve Recirculating Valve The 450RC valve allows continuous ﬂow of material while still being able to control shut-off at the mixer. Typical uses are for heated materials or materials with ﬁllers that need to remain suspended. Gear pump applications can also beneﬁt from the recirculating valve because pumps can be kept running while material is shut off at the mixer. Recirculation occuring at the valve instead of the pump eliminates pressure buildup in the lines, preventing off-ratio dispensing. The valve also incorporates a snuff-back feature that minimizes or eliminates the possibility of material dripping or stringing when the valve shuts off. Features  Dispenses two-component adhesives and sealants  Dispenses low- to high-viscosity urethanes, epoxies and silicones  Adjustable snuff-back prevents dripping  Can be mounted for beads or timed shots; optional handle is available for handheld applications  Provides an ON-OFF function. The metering of the adhesives in the proper ratio of A:B is controlled by the metering pumps.  Flow rates of 2-3 gallons/minute, depending on pump and material viscosity  Materials remain separate until they enter the mixer  Available in aluminum or stainless steel conﬁgurations  Manual, robotic or stationary operation. Speciﬁcations  Valve: Size: 5.2“ X 2.5“ X 2.3“ (132mm X 63.5mm X 58.4mm) Body Material: 6061-T6 Aluminum or 303 Stainless Steel O-ring Options*: Viton®, PTFE, Ethylene-Propylene (E-P) Lip Seal Options*: Viton®, Polyurethane (PU), PTFE, Polytuff, Ethylene-Propylene (E-P) * Repair kits containing a complete set of lip seals and O-rings are available.  Manifold: Size: 1.9“ X 2.5“ X 1.5“ (48.3mm X 63.5mm X 38.1mm) Material: 6061-T6 Aluminum or 303 Stainless Steel Options: 1:1 Ratio (with or without solvent check valve) Wide Ratio (with or without solvent check valve)  Weight: Aluminum Valve and Manifold: 2.0 lb (0.9 kg) Stainless Steel Valve and Manifold: 3.4 lb (1.5 kg)  Operating Parameters: Min. Operating Pressure: 80 psi (5.5 bar) Max. Fluid Pressure: 3500

Open the catalog to page 1

Recirculating Valve Series 450 Snuff Back Autovalves and Manifolds Ratio Flow Rate Alum. Retire Valve, Single Air Cylinder w/SnufF Back, GT Seals Stainless Steel Retire Valve, Single Air Cylinder w/Snuff Back, TT Seals Aluminum Manifold 1:1 Low Flow Aluminum Manifold with Air/Solvent Flush Valve 1:1 Low Flow Aluminum Manifold Wide Low Flow Aluminum Manifold with Air/Solvent Flush Valve Wide Low Flow Stainless Steel Manifold 1:1 Low Flow Stainless Steel Manifold with Air/Solvent Flush Valve 1:1 Low Flow Stainless Steel Manifold Wide Low Flow Carbon Steel Pipe Adapters Straight Adapter w/1/4"...

Open the catalog to page 2

Series 450RC Autovalve Recirculating Valve 316 Stainless Steel 37° JIC Adapters Part # Straight Adapter w/1/4" Male JIC Straight Adapter w/3/8" Male JIC Carbon Steel 37° JIC Adapters Part # 90° Elbow w/1/4" Male JIC Straight Adapter w/1/4" Male JIC Straight Adapter w/3/8" Male JIC Repair Kits Part # Night Cap & Ratio Check Cap Part # Ratio Check Cap w/Retaining Nut *These items are used in conjunction with the 1:1 ratio manifolds Handles & Base Part # Pistol Grip Handle w/Electric Momentary Switch (24V) Pistol Grip Handle w/Electric Push On/Off Switch (24V) Pistol Grip Handle w/Pneumatic Swi

Open the catalog to page 3

Series 450RC Autovalve Recirculating Valve Ordering Guide  Valve, manifold, and handle are ordered individually  Optional pistol grip handles and swivel base are available  For high back pressure conditions (i.e. over 1,000 psi/69 bar) order a double air cylinder  Seal Designations: T=PTFE, P=Polyurethane, V=Viton®, G=Polytuff Accessories  Handles/Mounts Nordson EFD offers electric or pneumatic handles for actuating the air cylinder of the valve. If using an electric handle, a solenoid from an outside vendor is required. EFD also offers a stationary swivel base for applications where...

Open the catalog to page 4