Catalogs >
Nordson EFD >
Series 400 Autovalve

Series 400 Autovalve
2Pages

Catalog excerpts

Series 400 Autovalve With meter mix and dispense systems, the pneumatic Series 400 Autovalve is a durable and reliable valve. The A and B shut off pistons have PTFE seals allowing high ﬂow with minimal maintenance as these seals can be adjusted without disassembly of the valve body. The 9/16-18 ﬂuid inlet ports of the Series 400 Autovalve allow ﬂow rates of 3-4 gallons per minute, depending on pump capability and material viscosity. Performance Guarantee • Dispenses two-component adhesives and sealants • Dispenses low- to high-viscosity urethanes, epoxies, and silicones • Can be mounted for beads or timed shots; optional handle is available for handheld applications • Provides an ON-OFF function. The metering of the adhesives in the proper ratio of A:B is controlled by the metering pumps. • Flow rates of 3-4 gallons/minute, depending on pump and material viscosity • Materials remain separate until they enter the mixer • Available in aluminum or stainless steel conﬁgurations • Manual, robotic, or stationary operation Speciﬁcations • Valve Size: 3.3" x 2.5" x 2.3" (132 mm x 63.5 mm x 58.4 mm) Body Material: 6061-T6 Aluminum or 303 Stainless Steel O-ring Options*: Viton®, PTFE, Ethylene-Propylene (E-P) Lip Seal Options*: Viton, Polyurethane (PU), PTFE, Polytuff, Ethylene-Propylene (E-P) *Repair kits containing a complete set of lip seals and O-rings are available. • Weight • Manifold Aluminum Valve and Manifold: Size: 1.9" x 2.5" x 1.5" 1.6 lb (0.7 kg) (48.3 mm x 63.5 mm x 38.1 mm) Stainless Steel Valve and Manifold: Material: 6061-T6 Aluminum 2.5 lb (1.1 kg) or 303 Stainless Steel Options: 1:1 Ratio (with or without • Operating Parameters solvent port ) Min. Operating Pressure: Wide Ratio (with or without solvent 80 psi (5.5 bar) port) Max. Fluid Pressure: Outlet Thread Size Options: 3500 psi (240 bar) 7/8"-14 (for standard bell mixers); Electric Handle Mount Switch: 24V 1 5/16"-12 (for oversized bell mixers) Series 400 Autovalves and Manifolds Part # Flow Rate 7701895 (400-100HATPV) Alum. Valve, Single Air Cylinder, TPV Seals 7701908 (400-100HBTPV) Alum. Valve, Double Air Cylinder, TPV Seals 7702095 (410-100HATGT) Stainless Steel Valve, Single Air Cylinder, TGT Seals – Aluminum Manifold Aluminum Manifold with Air/Solvent Flush Valve Aluminum Manifold Aluminum Manifold with Air/Solvent Flush Valve Aluminum Manifold High Flow Aluminum Manifold with Air/Solvent Flush Valve High Flow Aluminum Manifold High Flow Aluminum Manifold with Air/Solvent Flush Valve High Flow Stainless Steel Manifold Stainless Steel Manifol

Open the catalog to page 1

Accessories Static Mixers Mixer selection is critical when it comes to curing two-component adhesives and sealants. EFD offers a wide range of Series 160 Disposable Plastic Spiral Bell Mixers with different diameters, lengths, geometries, and oriﬁces to meet many different applications. Pistol Grip Handles Fluid Inlet Adapter Nordson EFD offers electric or pneumatic handles for actuating the air cylinder of the valve. If using an electric handle, a solenoid from an outside vendor is required. EFD also offers a stationary swivel base for applications where mobility is not required. Elbow...

Open the catalog to page 2