ProcessMate™ 100 Vacuum Pickup System The ProcessMate 100 Vacuum Pickup System (part #7012329) provides a simple, efficient way to lift and position small or delicate components in benchtop assembly processes. To lift the component, the operator simply places the pickup pen on the component and presses an electric foot pedal to apply vacuum. When the component has been positioned, releasing the foot pedal stops the vacuum and releases the component. A NORDSON COMPANY Features Benefits • Simple setup and operation • Comfortable, lightweight pickup pen • Assorted antistatic tips and vacuum cups meet a variety of applications • Compact size saves benchtop space • Faster, more precise placement than conventional tweezers • Prevents damage to delicate or intricate components • Leaves one hand free to apply adhesive, solder or other assembly fluid • Simple, cost-effective way to increase throughput www.efd-inc.com [email protected] USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 5854 2345 Sales and service of EFD dispensing systems are available worldwide. ™

ProcessMate™ 100 Vacuum Pickup System Specifications Cabinet Dimensions: Weight: Input AC (to power supply): 184 mm x 50.8 mm x 127 mm (7.25" W x 2" D x 5" H) 1 Kg (2.2 Lbs) Universal Multi Voltage 264/90 VAC~ – 50/60 Hz Output DC (from power supply): 24 VDC – 0.83 Amp maximum Power Requirements: 24 VDC – 0.83 Amp maximum DC Input Power Required: 8W-20W Internal Voltage: 24 VDC Footswitch: Voltage: Current: Contact closure 24 VDC 20mA Cycle Initiate: Foot Pedal, Finger Switch Maximum Cycle Rate: 600 cycles per minute Air Input Requirements: 7 bar (100 psi) maximum Air Output: 0-210 inch H2O dependent...