Catalogs >
Nordson Efd >
PICO Toμch Controller

PICO Toμch Controller
2Pages

Catalog excerpts

PICO Toµch Controller Intuitive touchscreen interface for precise PICO Pµlse valve control The PICO® Toµch™ controller features an intuitive touchscreen interface for easy setup and operation of Nordson EFD’s PICO Pµlse™ jet dispensing valve. The touchscreen interface allows users to set extremely precise operating parameters of the PICO Pµlse valve for greater process control. Fine-tune dispensing performance by setting ramp open and close parameters and stroke control on the unique Wave Profile screen. Adjust pulse time in increments as small as 0.01 ms, set valve operating temperature, and easily navigate to all required setup parameters. Cycle the PICO Pµlse valve at up to 1000Hz continuous, with up to 1500Hz burst capability.* The Toµch controller provides the flexibility to dispense a wide range of fluids and viscosities with a finer level of precise adjustments, not just presets. Better slope control delivers more repeatable deposits and prevents turbulence and air bubbles from entering the fluid, preventing deposit variations. *With approved conditional settings. Features • Easy-to-use touchscreen interface for precise control of PICO Pµlse valve. Use the PICO Toµch controller to set precise operating parameters for optimal dispensing performance. • Programmable valve actuation signal, known as ramp or wave profile, for fine-tuning dispensing performance. • 480 x 272 resolution for sharper screen visibility. • More than 12 language display options. • Small overall footprint. • Benchtop or panel mount capability. Benefits • Intuitive touchscreen interface for easy setup and operation. • More control of valve operating parameters and dispensing performance. • Flexibility to control the dispense of a wide range of fluids and viscosities. • Programmable lockout to prevent unintended changes to settings. • Finer adjustment of pulse time, stroke control, and op

Open the catalog to page 1

Input AC (to power supply) 100-240 VAC +/-10%, 50-60 Hz, 2A Output DC (from power supply) 24 V, 6.25 A Heater output voltage 24 VDC, 30 W maximum Heater outputs Setpoint range: 0-100° C (32-212° F); 0.1° C increments Temperature input type at valve: RTD Indication accuracy: ±1° C Sample rate: 60 per second Control method: PID Cycle rate Valve-dependent Time range 100 gs to 9.9999 s (depending on the open profile time) Ambient operating conditions Temperature: 5-45° C (41-133° F) Humidity: 85% relative humidity at 30° C (86° F), non-condensing Height above sea...

Open the catalog to page 2