Controlled, consistent coatings and bonding for optical media. dyes solvents UV lacquers UV adhesives resins The 702M-SS mini-diaphragm dispense valve is designed for drip-free coating and consistent shot-toshot bonding with low-to-medium viscosity fluids in the optical media industry. Used in combination with Nordson EFD PTFE*-coated dispense tips, the 702M-SS valve significantly reduces reject rates and applies consistent, precise deposits of dye, UV lacquers and UV adhesives. At 60% smaller and 70% lighter than other dispense valves, the 702M-SS mounts above the disc and is easy to move, which means less maintenance and wear on the disc machine’s robotic arm. *PolyTetraFluoroEthylene Features • Consistent shot-to-shot performance • Quick, clean cutoff eliminates drips and stops crystallized contamination • Low maintenance for millions of cycles Performance Guarantee • Tamper-resist stroke adjustment • Unique design eliminates trapped air and bubbles “The valve start/stop performance is very good; no droplets formed. The size is much smaller, a particular advantage for the dispense arm robot.” — EFD optical media OEM customer www.nordsonefd.com [email protected] USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 India +91 80 4021 3600 Asia & China: +86 (21) 3866 9006 Sales and service of EFD dispensing systems are available worldwide.

Mini-diaphragm valve systems The complete system includes the 702M-SS dispense valve, ValveMate™ 8000 controller, fluid reservoir and dispense tip. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers a full line of reliable dispensing systems to meet your specific application requirements. ValveMate 8000 Controller Valve open time is the primary control of deposit size. The ValveMate controller puts push-button adjustment of valve open time where it needs to be — at the valve. • Multi-valve control- up to (4) valves • Maximum machine...