Catalogs >
Nordson Efd >
Material Fluid Pressure Regulator

Material Fluid Pressure Regulator
2Pages

Catalog excerpts

1209-530 Series Air-Operated High-Pressure Mastic Fluid Regulator The 1209-530 Series mastic fluid regulator provides accurate material regulation for a large variety of applications. Mastic regulators are used where one pump supplies multiple guns to dispense mastics and other semi-solid materials or when it is important to operate guns at lower fluid pressures. When the regulators are installed ahead of each dispense gun, they control pressure so the guns furthest from the pump have sufficient pressure for effective operation, and those close to the pump are not over-pressured. They also moderate flow surges when line valves are opened or when pump changeover occurs. Application methods include extrude, shower, stream, swirl and spray. Features and Benefits Provides consistent material pressure from the supply source to the dispense valve or metering systems Pneumatic regulator can be mounted on the regulator or remotely for convenient control Accepts up to 5000 psi (345 bar; 34.5 MPa) inlet pressure and 500 to 3500 psi (34 to 241 bar; 3.4 to 24.1 MPa) outlet pressure Carbon steel construction with carbide ball and seat High-pressure and high-volume flow rate capable 3/4" NPT fluid ports 1209-530 Mastic Fluid Regulator

Open the catalog to page 1

Air-Operated High-Pressure Mastic Fluid Regulator For more information, speak with your Nordson Typical Applications • • • • • • Underbody and Sealer Anti-Flutter Mastic Structural Adhesive Sound Deadener Powertrain Sealers Metering System Supply your Nordson regional office. United States and Canada Plymouth, Michigan +1.734.459.8600 Phone sales@sealantequipment.com Andina Envigado, Colombia +574.339.2500 Phone nordsonandina@nordson.com Australia Sydney, Australia +61.2.8814.4695 Phone ausspares@nordson.com Urethanes Epoxies Silicones PVC Sealers Lubricants Others China Shanghai, China...

Open the catalog to page 2