Compact diaphragm valve for fine flow control. activators anaerobics cyanoacrylates fluxes solvents uv-cure & light-cure adhesives A NORDSON COMPANY The 752V Series dispense valve systems accurately control the application of most low to medium viscosity fluids. The unique seal-less design incorporates an inert polymer diaphragm that isolates the actuator from the valve. Valve open time can be as short as 15 milliseconds. The adjustable open/close stroke 0.13 to 0.64 mm (0.005" to 0.025") means very fast response and positive shutoff. Model 752V-UHSS with UHMW* polymer wetted parts is used for dispensing solvents, cyanoacrylates, anaerobics and fluxes. A light blocking acetal valve chamber on the 752V-SS provides consistent, bubble-free dispensing of UV-cure polymers. *Ultra High Molecular Weight polyethylene Features Performance Guarantee • Compact size and weight • Adjustable fluid flow control “After 100 million cycles, we took the 752V-UH apart to check it. No repairs or parts needed. Reassembled and had it back in operation in about 5 minutes.” Remington Arms • Positive shutoff, no seals • Diaphragm life exceeds 100 million cycles • Easy cleaning • FDA-compliant wetted parts • Cycle rate exceeds 500/minute • Low-maintenance design www.efd-inc.com [email protected] USA 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 3866 9006 Sales and service of EFD® dispensing systems are available worldwide. ™

Diaphragm valve systems The complete system includes the 752V Series valve, ValveMate™ 8000 controller, the fluid reservoir and dispense tip. Expert technical assistance and high quality standards ensure productive, trouble-free performance. EFD offers a full line of reliable dispensing systems to meet your specific application requirements. ValveMate 8000 Controller Valve open time is the primary control of deposit size. The ValveMate controller puts push-button adjustment of valve open time where it needs to be — at the valve. 0 20 5 0 20 EFD 752 5 EFD 752 Electrical Constant Air Fluid Actuating...