2200-595 Snuf-Bak™ Series High Volume Mix and Dispense Valve for High Viscosity Materials Point of application mix and dispense valve assemblies Snuf-Bak™ dispense valve for medium to high viscosity materials No-Flush™ disposable static mixers reduce waste and minimize maintenance Readily mounts with two (2) screws and accurate fixed positioning using two (2) dowel pins Double air operated (air to open / air to close) insures immediate start and stop to a dispense operation Model options for wide ratio materials, stainless steel wetted components and mounting Precise, efficient, cost-effective: three great reasons why the 2200-595 mix/dispense valve is tough to beat. The valve provides complete control over the application of metered two-component adhesives or sealants either fixed or robot mounted. This is the best ‘point of application’ high volume and high viscosity mix and dispense valve available. Responsive The short stroke length and double air operation of the valve combine to produce an immediate start or stop to the dispense cycle making it ideal for automated applications. Durable Design With wear resistant seals and hardened components, the valve’s service life is enhanced - a distinct advantage for high volume, repetitive operations or when using filled or abrasive materials. The unrestrictive internal design allows for the free flow of even high viscosity materials, while insuring that the two material components remain separate until they enter the No-Flush™ mixer/nozzle. 2200-595 Stainless Steel Version 45677 Helm Street • P.O. Box 701460 • Plymouth, MI 48170 • USA Phone: (734) 459-8600 • Fax: (734) 459-8686 E-mail: [email protected] • www

2200-595 Snuf-Bak Dispense Valve 2200-595 Dispensing a High Viscosity 2-Component Adhesive at High Speed Specifications: Maximum Inlet Pressure: Metallic Construction: (A and B) Fluid Inlet Ports: Air to Open and Close Ports: Separation Fluid Port: Mounting Holes: Precision Alignment Holes: Operation: Minimum Air Pressure: Body Diameter: Body and Adj. Screw Length: Snuf-Bak Adjustment Screw: Mixer Shroud Thread: 3,000 PSI Carbon Steel, Aluminum (Std.) Stainless Steel (Optional) 2200-595 Valve and End-Of-Arm 1/2” NPT(f) Tooling Mounted on Robot Wrist 1/4” NPT(f) 1/4” NPT(f): for air sensitive...